SD3 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Universal Tri-Level dimming control modules for use with 0-10V dimmable LED Drivers

SD3 Step-Dimming Modules
Universal Tri-Level dimming control modules
for use with 0-10V dimmable LED Drivers
Two models: for 25-50-100 or 33-66-100 light output
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Max Pass Current:
1.0A @ 120Vac Input, 0.43A @ 277Vac Input
Max LED Driver Power: 100W
Max Insertion Loss:
<1.5W @ 100W LED Driver
Class 2 Control Output: 0-10V (Current Sinking only, 50mA max)
Warranty:
5 years
Environmental Specifications
Storage Temperature:
-40ºC to +85ºC
Max Case Temp:
75°C
Min Operating Temp:
-40ºC
Humidity:
5% to 95%
Lifetime:
1,000,000 Switching Cycles
The SD3 works with two standard wall switches to
provide quick switching between 3 levels of light
output from LED luminaires.
• Works with 0-10V dimmable LED drivers
• Eliminates need for expensive dimmer unit
• Works with occupancy sensors
• Class 2 Output
AC
3.5 ⁷
85
1.5 1.5
17.5
Line (Black/White)
Line (Black/Red)
Neut (White)
2 x Ø 3.5
AC Line Out (Black)
Tc
152
10.75
10.75
DC
(+) Purple
(-) Gray
152
Input Line Voltage Driver Output Current
Black/Red Black/White SD3-25
SD3-33
On
On
100%
100%
On
Off
<50%
<66%
Off
On
<25%
<33%
Off
Off
0%
0%
Contact TRP for custom output variants!
For wiring diagrams, see next page
7.5 ₈
6 ^9.5
E359020
NOTES:
1. Compatibility with 0-10V dimmable drivers manufactured by companies other than Thomas Research
Products cannot be assured. Please contact your sales representative for a list of compatible drivers.
2. This device is designed to operate with standard wallbox switches only.
3. UL requires that these modules be installed within the luminaire enclosure.
Specifications subject to change without notice.
Rev 3-17-15
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com