S6B-XH-A Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – 2.5mm pitch/Disconnectable Crimp style connectors

XH CONNECTOR
Emboss Tape Radial Tape
2.5mm pitch/Disconnectable Crimp style connectors
5
JST
The XH connector was developed based
on the high reliability and versatility of our
NH series connectors. The connector is very
small with a mounting height of 9.8mm.
• Original folded beam contact
• Box-shaped shrouded header
• Header with a boss
• Interchangeability
• Conforming to the HA terminal
Specifications –––––––––––––––––––
• Current rating: 3A AC, DC (AWG #22)
• Voltage rating: 250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 10m Ω max.
After environmental testing/ 20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 1,000V AC/minute
• Applicable wire: AWG #30 to #22
• Applicable PC board thickness: 1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1^{Certified LR20812}
2 ^J50014297
ʪThrough-hole type (viewed from soldening side)ʫ
Top entry type

 ^ʶ

Ê¢NJOÊ£

Side entry type
 ^ʶ

Ê¢NJOÊ£

2 circuits П^ʶ
3
to
20
circuits
П
Ê´
ɹ
П
Ê´
ɹ
Top entry type with a boss
(1 circuit)
(2 circuits or more)
 NJO
^ʶ

П
Ê´
ɹ
^ʶ


П
Ê´
ɹ
П^ʴɹ

2 circuits П^ʶ
3
to
20
circuits
П
Ê´
ɹ
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions
should be larger. The dimensions above should serve as a guideline. Contact JST for details.
ʪSMT type (viewed from component side)ʫ
Side entry type


End face of wafer on the mating side



Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.


2. The dimensions above should serve as a guideline. Contact JST for details.
1