S25F-62-R1-SS-1024 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – HS25 Incremental Optical Encoder

HS25 Incremental Optical Encoder
The HS25 combines the
rugged, heavy-duty features
usually associated with
­shafted encoders into a
hollow-shaft style. Its design
includes dual bearings and
shaft seals for NEMA 4, 13
and IP65 environmental
ratings, a rugged metal
­housing, and a cable gland.
This low-profile design,
just 2” deep, is easily mounted on a through shaft. Securing the encoder to the shaft
is simple with a collet-style single screw clamp. The optional anti-rotation tether block
maintains housing stability during operation. The HS25 is designed to accommodate
shafts up to 3/4” in diameter. With optional insulating inserts, it can be mounted on
smaller diameter shafts. Applications include motor feedback and vector control, paper
converting and printing industries, robotic control, web process control along with many
other applications.
Special Models of the HS25 Incremental Encoder are available with one or more of the fol-
lowing certifications. Consult factory for details.
EN 55011
and EN 61000-6-2
UL 12.0035X
UL 13.0071X
CENELEC
II 1 G Ex ia IIB/IIC T4
II 3 G Ex nA IIB T4 Gc
U.S. Standards Class I, Group A,B,C & D;
Class II Group E,F & G
Canadian Standards
C _{Class I, Zone 0, Group IIC}
Class I, Div 2, Group A,B,C & D;
Class II, Div 2, Group F & G
Mechanical Specifications
Shaft Bore: 0.375”, 0.750”, 0.625”, 0.500”, dia. 0.625” and under are
supplied with insulating sleeves.
Allowable Misalignment: 0.005: T.I.R. on mating shaft 0.75” from shaft end
Bore Runout: 0.001” T.I.R.
Starting Torque at 25° C: Through shaft version (SS) = 7 in-oz (max);
Blind shaft version (BS) = 4 in-oz (max)
Bearings: 52100 SAE high carbon steel
Shaft Material: 6061-T6 aluminum alloy
Bearing Housing: Die cast aluminum with protective finish
Cover: Die cast aluminum with protective finish
Bearing Life: 7.5 X 10⁹ revs (25,000 hrs at 2500 RPM)
Maximum RPM: 6,000 RPM (see Frequency Response, below)
Moment of Inertia: 17 X 10^–4 oz-in-sec²
Weight: 9 oz typical
Electrical Specifications
Code: Incremental
Output Format: 2 channels in quadrature, 1/2 cycle index gated
with negative B channel
Cycles per Shaft Turn: up to 2048 (see table A, this page)
Supply Voltage: 5 to 28 VDC available (see note 5)
Current Requirements: 100 mA typical + output load, 250 mA (max)
Voltage/Output: (see note 5)
15V/V: Line Driver, 5–15 VDC in, Vout = Vin
28V/V: Line Driver, 5–28 VDC in, Vout = Vin
28V/5: Line Driver, 5–28 VDC in, Vout = 5 VDC
28V/OC: Open Collector, 5–28 VDC in, OCout
Protection Level: Reverse, overvoltage and output short circuit
Frequency Response: 100 kHz (see note 7)
Output Terminations: (see table 1, back page)
Note: Consult factory for other electrical options
Environmental Specifications
Enclosure rating: NEMA 4 & 13 (IP65) when ordered with shaft seal
and a cable gland.
Temperature: Operating, 0º to 70ºC; extended temperature testing up to
85ºC available (see note 8); Storage, -25º to 90º C unless extended tem-
perature option called out
Shock: 50 g’s for 11 msec duration
Vibration: 5 to 2000 Hz @ 20 g’s
Humidity: 98% RH non-condensing
NOTES & TABLES: All notes and tables referred to in the text can be found
on the back of this page.
HS25 Incremental Ordering Options FOR ASSISTANCE CALL 800-350-2727
Use this diagram, working from left to right to construct your model number (example: HS25F-62-R1-SS-1024-ABZC-28V/V-SCS18).
All notes and tables referred to can be found on the back of this page.
HS25
TYPE:
HS = Hollow Shaft
25 = 2.5” Encoder
Diameter
SHAFT BORE:
75 = 0.750”
62 = 0.625”
50 = 0.50”
37 = 0.375”
X=
Express
Encoder
­HOUSING CONFIG:
F = Standard
EXPRESS ENCODERS^®  Items highlighted with
SHAFT SEAL
NO. OF CHANNELS:
VOLTAGE/OUTPUT:
HAZARDOUS
SPECIAL
CONFIGURATION:
SS = Through Shaft Rubber Seals
A = Single Channel
AB = Dual Quad. Ch.
28V/V = 5–28Vin/out
28V/5 = 5–28Vin/5Vout
AREA RATINGS:
Blank = None
FEATURES:
S = Special
BS = Blind Shaft Rubber Seal
ABZ
FS = Through Shaft Felt Seals
AZ
BFS = Blind Shaft Felt Seal
TETHER: ^{See note 2}
Blank = None
R1 = Tether Block
and Pin
R2 = Tether Arm
CYCLES PER
TURN:
(Enter Cycles)
See table A
= Dual with Index
= Single with Index
See note 3
28V/OC = 5–28Vin/OCout
See note 5
EX = Intrinsically Safe
NI = Non-Incendive
Contact factory for
voltage options
COMPLEMENTS:
C = Complementary
Outputs
OUTPUT TERMINATION:
SM12 = MS3112E12-10P
SCS = Shielded, Jacketed Cable with
See note 4 _{gland seal and cable length in}
features specified
on purchase order
(consult factory)
See note 6
Cable
inches,
(i.e. SCS18 = 18 inches)
SCS18-M18 = SM18 connector on end of cable
are standard Express Encoders and ship in one to three days.
with length specified in inches
(i.e. SCS18-M18)
M18 = MS3101F18-1P
See table 1 and note 9
Specification No. 02065-001 Rev.5-16
These commodities, technology or software if exported from the United States must be in accordance with the Bureau of Industry, and Security, Export Administration regulations. Diversion contrary to U.S law is prohibited.