RTN100 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – MICRO-LITEPIPE

B?J;F?F; ^
C?9HE#B?J;F?F; ^
IF;9?<?97J?EDI
C7J;H?7B
LITEPIPE ^® - Acrylic (Clear optical grade)
Grommet - J-Von
:;I?=D
Low profile, small diameter LITEPIPE ^®.
CEKDJ?D= Mounts in .102 ˝ (2.59mm) hole on 3/16 ˝ centers.
Use grommet retainer (RTN 100).
B;:
Surface mount, vertical and horizontal LEDs.
LITEPIPE ^® products for blending multicolor LEDs are available.
IJ7D:E<<
Use standoff to adjust height of standard LED above the PCB in order to
maintain a maximum .050 ˝ clearance between LITEPIPE ^® and LED.
See STD Series data sheet on page 29.
IKH<79;CEKDJB;:7FFB?97J?ED
GAP
0.050˝
Pass LITEPIPE ^® through panel opening. Press on retaining ring. Air gap .050 ˝ maximum
between LED and LITEPIPE ^® for best performance.
U.S. & Foreign Patents Issued and Pending
L;HI7J?B?JO
The 2.5mm LITEPIPE ^® provides a method of transmitting the light from PCB mounted LEDs to the
front display panel. Both styles of LEDs, surface mount, 3mm and 5mm standard packages can be
displayed in this manner.
8H?=>JD;II
The LITEPIPE ^® increases the apparent brightness and viewing angle of a PCB-mounted LED. The
LITEPIPE ^® transmits the light from the source to the lens, which in turn disperses the light up to
160 degrees.
7FFB?97J?ED
The 2.5mm LITEPIPE ^® is available for use with both surface mount and standard package 3mm
and 5mm LEDs. Because there is no physical connection between the LITEPIPE ^® and PCB mounted
LED, the circuit board can be installed or removed without disturbing the panel display.
?DIJ7BB7J?ED
The LITEPIPE ^® assembly is easily installed. Pass the LITEPIPE ^® through the panel opening and
press on grommet retainer to secure unit to the panel. Slide PCB into position aligning LED with
the end of the LITEPIPE ^®.
J>HEK=>#>EB;B;:7FFB?97J?ED
GAP .050˝
Pass LITEPIPE ^® through panel opening. Press on retaining ring. Air gap .050 ˝ maximum
between LED and LITEPIPE ^® for best performance.
EH:;H?D=9E:;I
LMC XXX CTP
MODEL
(RTN 100 is sold separately).
Custom lengths available upon request.
Minimum order quantity may apply.
COLOR
CTP Clear Only
LITEPIPE ^®
LENGTH
(INCHES)
020 (.200 ˝ ) 080 (.800 ˝ )
040 (.400 ˝ ) 100 (1.00 ˝ )
060 (.600 ˝ ) 120 (1.20 ˝ )
EKJB?D;:H7M?D=
LMC LITEPIPE ^®
RTN 100
H;9ECC;D:;:B;:i
.
mmm$L99B?J;$Yec
lYYiWb[i6lYYb_j[$Yec
I;; F7=;)&#))
'$.&&$+(($++*,