RP1A Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Solid State Relays PCB, 1-Phase ZS/IO Types RP1A, RP1B

Solid State Relays
PCB, 1-Phase ZS/IO
Types RP1A, RP1B
• AC Solid State Relay for PCB mounting
• Zero switching or instant-on
• Rated operational current: 3, 5 or 5.5 AACrms
• Rated operational voltage: Up to 480 VACrms
• Surface mount technology
• Flexible encapsulation for extended life
• Control voltage: 3 to 32 VDC* / 16 to 32 VAC**
• Opto-isolation: > 4000 VACrms
• Blocking voltage: Up to 1000 Vp
• Non-repetitive surge current: Up to 250 Ap
Product Description
Ordering Key
The RP1 is an SSR series for
socket- or PCB-mounting,
providing an ideal interface
between logic controls and
AC loads. The RP1 is
designed for resistive and
inductive loads up to
480VACrms. Two regulated
control voltage ranges cover
most standard input require-
ments in an economic pack-
age. These features allow a
direct substitution of existing
PCB mounted relays with
RP1. Internally this new series
enjoys an improved technical
design with the introduction of
stress-free flexible encapsula-
tion and automated assembly
Type Selection
of components. Opto-isola-
tion and load switching are
performed by individual com-
ponents, providing higher reli-
ability than monolithic
designs. Additionally RP1..6
is a special version with high
current surge capability that
reduces fusing requirements.
This relay can also drive high-
er AC53a loads up to 5 A.
The Solid State technology
used can withstand peak volt-
ages of 1000V, making the
RP1 series suitable to drive
AC loads such as valve
solenoids and small induction
motors.
Solid State Relay (PCB)
Number of poles
Switching mode
Rated operational voltage
Control voltage
Rated operational current
RP 1 A 23 D 3
Switching mode
Rated operational voltage Rated operational current Control voltage
A: Zero switching
B: Instant-On switching
Selection Guide
23: 230 VACrms
40: 400 VACrms
48: 480 VACrms
3: 3 AACrms
5: 5 AACrms
6: 5.5 AACrms
D: 3 to 32 VDC*
A: 16 to 32 VAC**
* 4 to 32 VDC for RP1A48..
4 to 32 VDC for RP1B40.. and RP1B48..
** Only available for 230V, 5.5 A
Rated operational Non-rep. voltage Control voltage
voltage
Rated operational current
3 AACrms
5 AACrms
5.5 AACrms
230 VACrms
400 VACrms
480 VACrms
650 Vp
850 Vp
1000 Vp
3 to 32 VDC
16 to 32 VAC
3 to 32 VDC
4 to 32 VDC
4 to 32 VDC
RP1A23D3
RP1B23D3
-
RP1A40D3
RP1B40D3
RP1A48D3
RP1B48D3
Selection Guide (mounted on DIN EN adaptor)
RP1A23D5
RP1B23D5
-
RP1A40D5
RP1B40D5
RP1A48D5
RP1B48D5
RP1A23D6
RP1B23D6
RP1A23A6
RP1A40D6
RP1B40D6
RP1A48D6
RP1B48D6
Rated operational Non-rep. voltage Control voltage
voltage
Rated operational current
3 AACrms
5 AACrms
5.5 AACrms
230 VACrms
650 Vp
5 to 34 VDC
16 to 32 VAC
* For operational voltages ≥ 230 VACrms add suffix M2 to part no.
RP1A23D3M1
RP1B23D3M1
-
RP1A23D5M1
RP1B23D5M1
-
RP1A23D6M1*
RP1B23D6M1
RP1A23A6M1
Specifications are subject to change without notice (28.02.2007)
1