RJH-10V562MJ7 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – 105°C Use, High-Reliability, Low Impedance Capacitors

RJH MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
105˚C Use, High-Reliability, Low Impedance Capacitors Series RJH
• The capacitor of this Series achieves high reliability under the
environmental loading prevailing in a piece of equipment on
which it is mounted.
• Guarantees 5000 hours at 105˚C.
(ø 5 to 6.3: 2000 hours ; ø 8 to 10: 3000 hours)
Low impedance
RJH
RJJ
Specifications
Item
Category temperature range (˚C)
Tolerance at rated capacitance (%)
Leakage current (µA)
Tangent of loss angle
(tanδ)
Characteristics at high
and low temperature
Endurance (105˚C)
(Applied ripple current)
Marking color : White print on a black sleeve or
Gold print on a brown sleeve
Performance
−55 to +105
±20
Less than 0.01CV + 2 (after 2 minutes) C: Rated capacitance(µF); V: Rated voltage(V)
(20˚C,120Hz)
(20˚C)
Rated voltage (V)
tanδ (max.)
0.02 is added to every 1000µF increase over 1000µF.
6.3
10
16
25
35
50
63
100
0.22
0.19
0.16
0.14
0.12
0.10
0.08
0.07
(20˚C,120Hz)
Rated voltage (V)
6.3
10
16
25
35
50
63
100
Impedance ratio
Ζ−25˚C / Ζ+20˚C
2
2
2
2
2
2
2
2
(max.)
Ζ−55˚C / Ζ+20˚C
3
3
3
3
3
3
3
3
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
(ø 5 to 6.3: 2000 hours)
5000 hours
(ø 8 to 10 : 3000 hours)
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Shelf life (105˚C)
Applicable standards
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Voltage application treatment
1000 hours
The initial specified value or less
Within ±15% of initial value
150% or less of the initial specified value
JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985)
Outline Drawing
Vent(except 5)
Sleeve
Unit: mm
d±0.05 copper clad steel wire(tinned)
L+α max.
5
15min. min.
øD
5
6.3
8
10 12.5 16
18
F
2.0 2.5 3.5 5.0 5.0 7.5 7.5
ø d 0.5 0.5/0.6 0.6 0.6 0.6 0.8 0.8
α
1.0 1.0 1.0 2.0 2.0 2.0 2.0
• The electric characteristics are described on page 106.
Coefficient of Frequency for Rated Ripple Current
Rated
Frequency(Hz)
120
1k
10k
100k
capacitance(µF)
0.47 to 4.7
0.40
0.68
0.78
1
5.6 to 47
0.50
0.76
0.87
1
56 to 270
0.70
0.85
0.90
1
330 to 1000
0.80
0.93
0.98
1
1200 to 15000
0.90
0.95
1
1
Part numbering system (example: 10V5600µF)
Environmental
item
RJH — 10 V 562
M
Series code
Rated voltage
symbol
Rated capacitance Capacitance
symbol
tolerance symbol
J7 #
Casing
symbol
Former item
RJH — 10 V 562
M
Series code
Rated voltage
symbol
Rated capacitance Capacitance
symbol
tolerance symbol
J7
Casing
symbol
*
Additional
symbol
*
Case (øD)
Additional symbol
5 to 12.5
—
16 ^• 18
G
CAT.No.2004/2005E(2004.10.1)
60
NOTE
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.