Q202013PCI Datasheet, PDF (1/8 Pages) List of Unclassifed Manufacturers – Body is impact-resistant polycarbonate for PCI series and ABS for ABI series

SEPFpXHe((7c7-660330))444122122--22620110
Non-Metallic
Polycarbonate and ABS
QLINE® I
QLINE® I, Type 4X
Industry Standards
Polycarbonate Enclosure
UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997
cUL Listed per CSA C22.2 No 94; Type 4, 4X, 12, 13; File No.
E61997
Enclosure flammability evaluated per UL 508A
NEMA/EEMAC Type 4, 4X, 12, 13
CSA File No. 42186: Type 4, 4X, 12, 13
IEC 60529, IP66
ABS Enclosure
NEMA/EEMAC Type 4, 4X, 12, 13
IEC 60529, IP66
Application
The largest-sized QLINE® enclosure, QLINE I provides easy access and
protects larger controls from corrosive environments. Choose from
screw cover, hinge, internal mounting, variable depth and quick-
release latch options to meet your design and security requirements.
The ABS series shares the same features and similar physical
properties as the polycarbonate but is a more economical, non-UL
rated alternative.
QLINE® I
Non-Metallic: Polycarbonate and ABS
Specifications
•• Body is impact-resistant polycarbonate for PCI series and ABS for
ABI series
•• Opaque and clear covers are impact-resistant polycarbonate for
PCI; opaque covers are ABS for ABI series
•• Polycarbonate and ABS material is easily punched, drilled, filed or
sawed
•• Mounting holes molded directly under cover screws
•• Molded internal pads for mounting optional panels, rails and other
components
•• Molded internal rails for mounting adjustable-depth panel kit
•• Screws provided for mounting optional panel
•• Optional extension rings are molded polycarbonate
•• Cover includes a molded-in hole for wire lead
•• Seamless foam-in-place gasket assures water-tight and dust-tight
seal
•• Material is halogen free
Screw Cover Enclosures have easy-to-remove covers attached to
body with strong, durable polyamide cross-point cover screws.
Enclosures with Quick-Release Latches have polycarbonate hinges
and polyester latches with a padlock provision.
Finish
Polycarbonate and ABS enclosure material is RAL 7035 light-gray
inside and out. Optional panels are plated steel.
Accessories
See also Accessories.
Brass Insert Kit
Cover Screw Kit
Extension Rings
Hardware Kit
H2OMIT® Vent Drains, Type 4X
Hinge Kit
HOL-SEALERS™ Non-Metallic Hole Seals
Mounting Bracket Kit
Panel Depth Fitting
Modification and Customization
Hoffman excels at modifying and customizing products to your
specifications. Contact your local Hoffman sales office or distributor
for complete information.
Bulletin: Q41
Subject to change without notice
PH [phone] • FX [phone] • hoffmanonline.com
© 2009 Hoffman Enclosures Inc.
1
Spec-00411 E