PV2400FC Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – PowerVerter® Plus 2400W Industrial-Strength Inverter with 2 Outlets

PowerVerter® Plus 2400W Industrial-Strength
Inverter with 2 Outlets
MODEL NUMBER: PV2400FC
Highlights
Designed for heavy duty and
motor loads
24V DC input; 120V AC output; 2
outlets
2400W continuous output
Peak surge output: OverPower
(up to 1 hour)—3600W;
Double-Boost (up to 10
seconds)—4800W
High-efficiency power conversion
Automatic overload protection
Description
Continuously supplies up to 2400W of 120V AC power to 2 AC outlets from any 24V battery or automotive DC
source. Frequency control locks AC output at 60Hz for operating stability of motor loads. Includes a set of high
current DC input terminals for simple, permanent installation. Highly reliable large transformer design specializes
in powering motors and other inductive loads with high-current startup needs.
Applications
Industrial power tools, pumps,
appliances, mobile office
equipment, audio/video devices,
and more.
Package Includes
PV2400FC Inverter
Instruction manual
NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 250a should be positioned no more than 18" from the
PV2400FC's battery in the positive line.
Features
Converts 24V DC battery power to 120V AC power
2400W continuous output power
Peak surge output: OverPower (up to 1 hour), 3600 watts; Double-Boost (up to 10 seconds), 4800W
Set of 2 bolt-down DC wiring terminals for 24V battery connection; 2 x NEMA 5-15/20R outlets
Frequency control for operating stability
High-efficiency operation conserves batteries to prolong run time
Diagnostic LEDs indicate load level (high, medium, and low) and battery charge (high, medium, and low)
DC fusing protects inverter against overload
High-impact polycarbonate housing
RJ45 port allows connection of APS/PowerVerter Remote Switch (APSRM4)
Specifications
OVERVIEW
Intended Application
Utility/Long-Haul Truck; RV/Marine
1/3