PS1000-R06L Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Electronic Pressure Switch

Air Checker:
New
Electronic Pressure Switch
[Option]
RoHS
Applicable fluid: Air, Non-corrosive gas, Non-flammable gas
New
PS1000 PS1100 PS1200 For Positive
Pressure
For Vacuum,
Residual Pressure
For Vacuum
Compact/lightweight
New ^{Addition of vacuum range}
electronic pressure switch
(−14.5 to 0 psi) (−100 to 0 kPa)
Easy adjustment of pressure setting trimmer
30
AIRCHECKER
- + PS1000-R06L
MADE IN JAPAN G
220n
14.5 psi
(–100 kPa)
0 psi
(0 kPa)
PS1200 (For vacuum)
0 psi
(0 MPa)
Vacuum
adjustment
range
Positive pressure
adjustment range
14.5 psi
(–0.1 MPa)
65 psi/ 58 psi
(0.45 MPa/0.4 MPa)
PS1000/1100
Specifications
Refer to Best Pneumatics No. 6 for Pressure Switch Precautions, and the
Operation Manual on our website for Specific Product Precautions.
Unit: mm
2-wire type
Applicable to either NPN or PNP output
Easy mounting
Plug-in reducer port for
One-touch fittings
High visibility
A large LED display for an easily
visible switch
Model
PS1000
PS1100
PS1200
Switch output
Present pres. q Setting pres.: ON
Present pres. a Setting pres.: ON
Max. operating pressure
145 psi (1 MPa)
73 psi (500 kPa)
Set pressure range
-14.5 to 65 psi (–0.1 to 0.45 MPa) -14.5 to 58 psi (–0.1 to 0.4 MPa) -14.5 to 0 psi (–100 to 0 kPa)
Fluid
Air/Non-corrossive gas/Non-flammable gas
Indicator light
ON: When red LED turns on
Temperature characteristics
o3% F.S.
Repeatability
o1% F.S.
Hysteresis
4% F.S. or less
10% F.S. or less
Load voltage
12 to 24 VDC o10%, Ripple (p-p) 10% or less
Load current
5 to 40 mA
Leakage current
1 mA or less
Internal voltage drop
5 V or less
Operating temperature range
32 to 140°F (0 to 60nC) (No condensation)
Insulation resistance
2 M7 or more (500 VDC measured via megohmmeter) between terminals and housing
Withstand voltage
1000 VAC (in 50/60 Hz) for 1 minute between terminals and housing
Weight
5 g (Excluding lead wire)
Port size
R06: ø6 reducer, R07: 1/4" reducer
Enclosure
IP40
Lead wire ^Note)
Grommet oil-resistant vinyl cabtire code 2 cores, ø2.55, 3 m,
Cross section: 0.18 mm², Insulator O.D.: 0.96 mm
Wetted parts material
Standards
Pressured sensor part: Silicon, Body part: PBT, O-ring: HNBR
CE (Option), RoHS
Note) For wiring, refer to the Operation Manual on our website, http://www.smcworld.com
Series PS1000/1100/1200
CAT.NAS100-23B