PS-564 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – END DETAILS FOR TERMINATING CABLE WITH 41 POS. S/M HIROSE CONNECTORS

RESPECTIVE END ORIENTATIONS
SAME SIDE- DESIGNATED "S"
OPPOSITE SIDE- DESIGNATED "O"
LENGTH
HEADER
CONNECTOR
LENGTH
CONNECTOR ORIENTATION WITH RESPECT TO CABLE
0.200"
0.120"
STYLE A
STYLE B
PIN #1
1.100"
0.345"
±0.010"
0.857"
±0.005"
NOTES
1) INSULATION: 0.002" THICK POLYESTER
2) CONDUCTORS: 0.003" X 0.011" (39 PLACES)
0.003" X 0.026" (2 PLACES, OUTER)
3) HEADER MATERIAL: DUPONT 612 NYLON
4) CONNECTOR: HIROSE P/N DF9C-41S-1V
5) CABLE RATING: AWM STYLE 20890 105°C, 90V, VW-1
6) CABLE THICKNESS= 0.010"±0.002"
7) CABLE WIDTH= 0.857"±0.005"
PIN #1
PROPRIETARY INFORMATION NOTICE
This document and the designs, specifications, and engineering
information disclosed herein are the property of Parlex Corp.,
and are not to be disseminated or reproduced without expressed
written consent. This document is loaned in confidence and then
only for consideration of the matter disclosed hereon. In accepting
loan of this document, the recipient agrees to keep it and the matter
disclosed hereon in confidence and not to use or permit their use in
any way detrimental to Parlex Corp.
CREATING A PART NUMBER
PS564 AB XXXX O B
i.e. PS564AA0254O B
EXAMPLE GIVEN INDICATES A 41 POS. CABLE ASSEMBLY
TERMINATED WITH HIROSE CONNECTORS (P/N DF9C-41S-1V)
IN WHICH PIN #1 TRACES TO PIN #1, ASSEMBLY IS
10.000" IN LENGTH, AND CONNECTORS ARE ON OPPOSITE
SIDES OF CABLE AS DEFINED AT LEFT.
P ARLEX CORPORATION
One Parlex Place
Methuen, Ma 01844
LAMINATED CABLE DIVISION
END DETAILS FOR TERMINATING CABLE WITH
41 POS. S/M HIROSE CONNECTORS
SIZE
B
SCALE
FSCM
18377
2:1
PS-564
REV
B
SHEET 1 OF 1