PPPC132LFBN Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – HEADER FEMALE, 2.54mm CC, ST

8
F
7
6
5
4
3
2
1
REVISIONS
REV.
ECO. NO
DESCRIPTION
DATE
BY
E
1869
UPDATE MAX CONTACT DEPTH, TOLERANCE &
NOTE, ADD SINGLE ROW PCB LAYOUT
12/23/2008
JH
UPDATE MIN. CONTACT DEPTH TO 2.29mm (WAS
F
2055
3.175), MAX. CONTACT DEPTH TO 6.00mm (WAS
6.05), INSULATOR WIDTH TO 2.50mm (WAS 2.54)
11/12/09
LH
F
FOR 1-ROW, 5.08mm (WAS 5.00) FOR 2-ROW
G
2164
CORRECT STANDOFF ON THE RIGHT VIEW AND THE
ISO VIEW.
7/28/2010
LH
E
E
B
A±.004[ 0.10]
A±.004[ 0.10]
.100 2.54
D
DUAL ROWS
.100 2.54
D
.100 2.54
.100 2.54
B
SINGLE ROW
.040±.002 1.02±0.05
RECOMMENDED PCB LAYOUT
SINGLE ROW
TOLERANCE: .002[ 0.05]
.040±.002 1.02±0.05
RECOMMENDED PCB LAYOUT
DUAL ROWS
TOLERANCE: .002[ 0.05]
C
B .014[ 0.35]
.236±.008 6.00±0.20
.100 2.54
DUAL ROWS
C
.090 2.29 REF
.200 5.08
.335 8.50
B
NOTES:
1. INSULATOR MATERIAL: SEE PART NUMBER CODING.
2. CONTACT MATERIAL: .PHOSPHOR BRONZE.
3. CONTACT PLATING: SEE PART NUMBER CODING.
4. CURRENT RATING: 3 AMPS
5. VOLTAGE RATING: 250V AC/DC
6. INSULATOR RESISTANCE: 5000 MEGOHMS MIN.
7. CONTACT RESISTANCE: 20 MILLIOHMS MAX.
8. DIELECTRIC WITHSTANDING: 500V AC.
9. OPERATING TEMPERATURE: -40° C TO +105° C.
A
.100±.002 2.54±0.05
A .008[ 0.20]
02-20, 0.20mm MAX.
21-40, 0.30mm MAX.
*INDICATED TEMPERATURE AND TIME IS FOR COMPONENT
INSULATOR. HIGHER PROCESSING TEMPERATURES MAY BE USED,
PROVIDED HEAT IS APPLIED FROM BACK SIDE OF PCB, AND INSULATOR
DOES NOT EXCEED INDICATED TEMPERATURE AND TIME.
8
7
6
5
.126±.012 3.20±0.30
.126±.008 3.20±0.20
B
.016±.002 0.40±0.05
.030±.002 0.75±0.05
.016±.002 0.40±0.05
.100±.002 2.54±0.05
Pb
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES[MM]
TOLERANCES:
ANGULAR: 5
.XX= .01 [.2]
.XXX= .006 [.15]
SURFACE FINISH: 63 Ra
REMOVE ALL BURRS AND SHARP EDGES .010 MAX
DATE
NAME
DRAWN 12/15/08
JH
THE INFORMATION HEREIN CONTAINS
PROPIETARY INFORMATION OF
HEADER FEMALE, 2.54mm CC, ST ^{SULLINS ELECTRONICS AND IS NOT DESCRIPTION}
A
TO BE REPRODUCED, USED OR
DISCLOSED TO OTHERS FOR ANY
PURPOSE EXCEPT AS SPECIFICALLY PART NUMBER
xPxCxxxLFBN-RC ^{AUTHORIZED IN WRITING BY AN}
OFFICER OF SULLINS ELECTRONICS.
RoHS COMPLIANT
INTERPRET DIMENSIONS AND GEOMETRIC
TOLERANCING
PER: ANSI Y14.5M-1994
SIZE DWG. NO.
C
10492
SCALE: 16:1
REV
G
SHEET 1 OF 1
4
3
2
1
FILE NAME: Z:\COMPONENTS\Taiwan\TAiPEI-CALIFORNIA\TO CALIFORNIA (JEN)\ECO 2164 FOR APPROVAL\10492, P(N)PxCxxxLFBN-RC PRINT: 8/12/2010