PLEDDC-120W Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Flicker-Free LED Drivers

PLEDDC-120W Series, Fixed Output & Dimmable
AC or DC Input
Flicker-Free LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Aluminum Housing
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max),
108-250 Vdc
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ > 70% load, 120-277V
Inrush Current:
<30 Amps max @ 277 Vac, cold start, full load
Input Current:
0.60 Amps max @ 230 Vac, 1.10 A max @ 120 Vac
Maximum Power:
120W
Line Regulation:
± 3%
Load Regulation:
± 4%
THD:
<_ 20% @ > 70% load, 120-277V
Ripple & Noise:
(Vpk-pk)
Ripple:
(Ipk-pk)
Start-up Time:
5% Vo max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μF Electrolytic
5% Io max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μFElectrolytic.
120 Hz component (Flicker Free)
150mS typical @ Full Load, 120Vac/60Hz (1000mS max)
Leakage Current:
0.68 mA max @ 120Vac, 0.75 mA max @ 277Vac
Hold Up Time:
30mS typical @ Full Load, 277Vac
Output Protection:
Over-Voltage, Over-Current, and Short Circuit
(reset by power cycling)
Environmental Specifications
Minimum Starting Temp: -30ºC
Maximum Case Temp. 90°C
Storage Temperature:
-40ºC to +85ºC
Humidity:
5% to 95%
Cooling:
Convection
Vibration Frequency:
5-55 Hz/2g, 30 minutes
Sound Rating:
Class A
MTBF:
280,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
EMC:
FCC 47CFR Part 15 Class B compliant
Impact Resistance:
1g/s
Weight:
24.4 oz (690 grams)
• Total Power: 120 Watts
• Input Voltage: 100-277 Vac Nom. or 108-250 Vdc
• UL Dry & Damp Location Rated
• IP66 & NEMA6
• High Power Factor
• UL Type HL Rated for Hazardous Locations
Constant Current Versions - Product Specifications
Model Number
Output Current Output Voltage Max Output Typical
(mA ±5%)
Range (Vdc) Power (W) Efficiency
PLEDDC120W-343-C0350-XX
350
114-343
120
92%
PLEDDC120W-266-C0450-XX
450
89-266
120
92%
PLEDDC120W-171-C0700-XX
700
57-171
120
91%
PLEDDC120W-114-C1050-XX
1050
38-114
120
91%
PLEDDC120W-086-C1400-XX
1400
29-86
120
91%
PLEDDC120W-068-C1750-XX
1750
23-68
120
91%
PLEDDC120W-057-C2100-XX
2100
19-57
120
90%
PLEDDC120W-049-C2450-XX
2450
17-49
120
90%
PLEDDC120W-043-C2800-XX
2800
15-43
120
90%
PLEDDC120W-038-C3150-XX
3150
13-38
120
90%
PLEDDC120W-034-C3500-XX
3500
12-34
120
89%
PLEDDC120W-028-C4200-XX
4200
10-28
120
89%
PLEDDC120W-024-C5000-XX
5000
8-24
120
89%
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Ordering Options:
-D: 0-10V & Resistance dimmable models dim 100-10%. Two extra wires on the output
side (+Purple/-Gray). Compatible with most quality 0-10V wall dimmers. See page 3.
-PD: PWM Dimmable models. Two extra wires on the output side(+Purple/-Gray). Dims
via positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4.
Sign Components Manual
E332160
Constant Voltage Versions - Product Specifications
Model Number
Output Voltage Output Current Max Output Typical
(Vdc ±5%)
Range (mA) Power (W) Efficiency
PLEDDC120W-024
24
1250-5000
120
89%
PLEDDC120W-028
28
1050-4200
120
89%
PLEDDC120W-034
34
875-3500
120
89%
PLEDDC120W-038
38
788-3150
120
90%
PLEDDC120W-043
43
700-2800
120
90%
PLEDDC120W-049
49
613-2450
120
90%
PLEDDC120W-057
57
525-2100
120
90%
PLEDDC120W-068
68
438-1750
120
91%
PLEDDC120W-086
86
350-1400
120
91%
PLEDDC120W-114
114
263-1050
120
91%
PLEDDC120W-171
171
175-700
120
91%
PLEDDC120W-266
266
113-450
120
92%
PLEDDC120W-343
343
88-350
120
92%
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 8-26-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com