PLED-200W Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Flicker-Free LED Drivers

PLED200W Series– Fixed Output & Dimmable
Flicker-Free LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Aluminum Housing
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Input Over-Voltage:
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ > 70% load, 120-277V
Inrush Current:
<60.0 Amps max @ 277Vac, cold start, full load
Input Current:
0.96 Amps max @ 230Vac, 1.82 A max @ 120Vac
Maximum Power:
200W
Current Accuracy:
± 3% Over input line variation
Load Regulation:
± 4%
THD:
Ripple & Noise:
(Vpk-pk)
Ripple:
(Ipk-pk)
Start-up Time:
<_ 20% @ > 70% load, 120-277V
5% Vo max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μF Electrolytic
5% Io max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μFElectrolytic.
120 Hz component (Flicker Free)
150mS typical @ Full Load, 120Vac/60Hz (1000mS max)
Leakage Current:
0.68 mA max @ 120Vac, 0.75 mA max @ 277Vac
Hold Up Time:
Protection:
30mS typical @ Full Load, 277Vac
Over-Voltage, Over-Current, and Short Circuit
(auto-recovery)
Environmental Specifications
Minimum Starting Temp: -30ºC
Maximum Case Temp. 90°C
Storage Temperature:
-40ºC to +85ºC
Humidity:
5% to 95%
Cooling:
Convection
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
Sound Rating:
MTBF:
Class A
280,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
EMC:
FCC 47CFR Part 15 Class B compliant
Impact Resistance:
1g/s
Weight:
33.2 oz (940 grams)
Ordering Options:
-D: 0-10V & Resistance dimmable models dim 100-10%. Two extra wires on the output
side (+Purple/-Gray). Compatible with most quality 0-10V wall dimmers. See page 3.
-D3: 3-wire dimmable models dim 100-10%. Three extra wires on the output side
(Yellow/Purple/Gray). Compatible with potentiometer dimming. See page 3.
-PD: PWM Dimmable models. Two extra wires on the output side(+Purple/-Gray). Dims
via positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4.
Sign Components Manual
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
• Total Power: 200 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66 & NEMA6
• UL Type HL Rated for Hazardous Locations
• UL Sign Components Manual (S.A.M. Models)
Constant Current Versions - Product Specifications
Model Number
Output Current Output Voltage Max Output Typical
(mA ±5%)
Range (Vdc) Power (W) Efficiency
PLED200W-445-C0450-XX
450
149-445
200W
92%
PLED200W-285-C0700-XX
700
95-285
200W
92%
PLED200W-190-C1050-XX
1050
64-190
200W
91%
PLED200W-142-C1400-XX
1400
48-142
200W
91%
PLED200W-114-C1750-XX
1750
38-114
200W
91%
PLED200W-095-C2100-XX
2100
32-95
200W
91%
PLED200W-081-C2450-XX
2450
27-81
200W
90%
PLED200W-071-C2800-XX
2800
24-71
200W
90%
PLED200W-063-C3150-XX
3150
21-63
200W
90%
PLED200W-057-C3500-XX
3500
19-57
200W
90%
PLED200W-047-C4200-XX
4200
16-47
200W
89%
PLED200W-040-C4900-XX
4900
14-40
200W
89%
PLED200W-035-C5600-XX
5600
12-35
200W
89%
PLED200W-032-C6300-XX
6300
11-32
200W
88%
PLED200W-024-C8330-XX
8330
8-24
200W
88%
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Constant Voltage Versions - Product Specifications
Model Number
• ^PLED200W-024
PLED200W-032
Output Voltage Output Current
(Vdc ±5%)
Range (mA)
24
2083-8330
32
1575-6300
Max Output
Power (W)
200W
200W
Typical
Efficiency
88%
88%
PLED200W-035
35
1400-5600
200W
89%
PLED200W-040
40
1225-4900
200W
89%
PLED200W-047
47
1050-4200
200W
89%
PLED200W-057
57
875-3500
200W
90%
PLED200W-063
63
788-3150
200W
90%
PLED200W-071
71
700-2800
200W
90%
PLED200W-081
81
613-2450
200W
90%
PLED200W-095
95
525-2100
200W
91%
PLED200W-114
114
438-1750
200W
91%
PLED200W-142
142
350-1400
200W
91%
PLED200W-190
190
163-1050
200W
91%
PLED200W-285
285
175-700
200W
92%
PLED200W-445
445
113-450
200W
92%
• Indicates S.A.M.
Rev 9-11-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com