PL-25A1 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Full compliance with the USB Specification v2.0

PL-25A1 Product Brochure
V0.9 10/13/06’
1
PL-25A1
Hi-Speed USB Host to Host Bridge Controller
OVERVIEW
The PL-25A1 is a single chip Hi-Speed USB Host-to-Host bridge controller specially designed for Windows
USB Easy Transfer cable and Microsoft Windows Easy Transfer program. The Windows Easy Transfer
program is built inside Windows Vista OS and also available for Windows XP Update. Using the Windows
Easy Transfer program, the PL-25A1 embedded USB Easy Transfer cable allows end-users to easily
connect (thru the USB port) an old computer running Microsoft Windows XP or Vista to another computer
running Windows Vista. Once the program has established connection for both computers, the end-user can
then transfer large data files and program settings from the old computer to the new computer. It’s one of the
fastest and easiest ways to transfer your files and settings to your new computer. The PL-25A1 embedded
cable is fully supported by Microsoft for Windows XP and Windows Vista OS.
BLOCK DIAGRAM
USB
Host A
D+/D-
USB2.0PHY
(UTMI)
Backend
SIE
Logic
Device
LED
EEPROM
Power on
Reset
Regulator
3.3/2.5V
Bulk FIFOs
Buffer Mgt.
(BMU)
MCU I/F
Power
Mgt.
Turbo 8032
MCU
USB2.0PHY
(UTMI)
Backend
SIE
D+/D-
USB
Host B
Logic
Device
Program
ROM
Program
RAM
Data RAM
FEATURES
Full compliance with the USB Specification v2.0
Built-in driver (USB Easy Transfer Cable) and
program (Windows Easy Transfer) support by
Microsoft Windows Vista and Windows XP
(Update or driver CD) Operating System
Transfer data and share resources between two
or more PCs with speed up to 480Mbps.
USB-IF Hi-Speed Logo Compliant with TID
40000183
Prolific Technology Inc.
7F, #48, Sec.3, Nan-Kang Rd., Taipei, Taiwan 115, ROC
Tel: [phone] Fax: [phone]
E-mail : [e-mail]
http://www.prolific.com.tw
On-Chip 3.3V-2.5V regulator for internal circuit
Dual data buffer supporting two-way data transfer
Supports external serial EEPROM to customize
vender/product related information
Supports LED indicator for connection and transfer
status
Bus powered from either USB port
No glue logic needed – can be embedded in small
spaces
LQFP64 packaging available