PCIE-7200 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 12 MB/s High-Speed 32-CH DI & 32-CH DO Cards

PCI/PCIe-7200
12 MB/s High-Speed 32-CH DI & 32-CH DO Cards
High-Speed DIO
PCI-7200
PCIe-7200
Introduction
ADLINK’s PCI/PCIe-7200 are high-speed digital I/O cards consisting of 32 digital input channels, and 32 digital output
channels. High-performance designs and the state-of-the-art technology make these cards suitable for high-speed
data transfer and pattern generation applications.
The PCI/PCIe-7200 performs high-speed data transfers using bus-mastering DMA via 32-bit PCI bus architecture.
The maximum data transfer rates can be up to 12 MB per second. Several digital I/O transfer modes are supported,
such as direct programmed I/O control, timer pacer control, external clock mode and handshaking mode. They are
very suitable for interfacing high-speed peripherals with your computer system.
Features
■ Supports a 32-bit 5 V PCI bus (PCI-7200)
■ x1 lane PCI Express^® interface (PCIe-7200)
■ 32-CH TTL digital inputs and 32-CH TTL digital outputs
■ Up to 12 MB/s transfer rate
■ Bus-mastering DMA for both digital inputs and outputs
■ Onboard programmable timer pacer clock
■ Supports handshaking digital I/O transfer mode
■ Multiple programmable interrupt sources
■ 5 V power available on connectors
■ Compact, half-size PCB (PCI-7200/PCIe-7200)
■ Operating Systems
• Windows 7/Vista/XP/2000/2003 Server
• Linux
■ Recommended Software
• AD-Logger
• VB.NET/VC.NET/VB/VC++/BCB/Delphi
• DAQBench
■ Driver Support
• DAQPilot for LabVIEW™
• DAQ-MTLB for MATLAB^®
• PCIS-DASK for Windows
• PCIS-DASK/X for Linux
Specifications
Digital I/O
■ Number of channels:
• 32-CH digital inputs
• 32-CH digital outputs
■ Compatibility: 5 V/TTL
■ Data transfer rate
• 12 MB/s with external 3 MHz clock, handshaking
or external strobe
• 8 MB/s with internal 2 MHz timer pacer
■ Digital logic levels
• Input high voltage: 2-5.25 V
• Input low voltage: 0-0.8 V
• Output high voltage: 2.7 V minimum
• Output low voltage: 0.5 V maximum
■ Output driving capacity
• Source current: 3.0 mA
• Sink current: 24 mA
■ Data transfers:
• programmed I/O, interrupt, bus-mastering DMA
Programmable Counter
■ Base clock: 4 MHz
■ Timer 0: DI clock source
■ Timer 1: DO clock source
■ Timer 2: Base clock source of timer 0 & 1
Interrupt
■ Sources:
EO_ACK, EI_REQ, Timer 0, Timer 1 or Timer 2
General Specifications
■ I/O connector
• PCI/PCIe-7200
-37-pin D-sub female
-40-pin Header
■ Operating temperature: 0˚C to 60˚C
■ Storage temperature: -20˚C to 80˚C
■ Relative humidity: 5% to 95%, non-condensing
■ Power requirements
Device
PCI-7200
PCIe-7200
Power Consumption
5 V @ 720 mA typical
12 V @ 200 mA
3.3 V @ 500 mA
■ Dimensions (not including connectors)
• 148 mm x 102 mm (PCI/PCIe-7200)
Terminal Boards & Cables
PCI/PCIe-7200:
■ DIN-37D-01
Terminal Board with One 37-pin D-sub Connector
and DIN-Rail Mounting (Cables are not included.)
■ ACLD-9137-01
General-Purpose Terminal Board with One 37-pin
D-sub Male Connector
■ ACLD-9137F-01
General-Purpose Terminal Board with One 37-pin
D-sub Female Connector
■ ACL-10137-1MM
37-pin D-sub male/male cable, 1 M
■ ACL-10137-1MF
37-pin D-sub male/female cable, 1 M
* For more information on mating cables, please refer to P2-61/62.
Ordering Information
■ PCI-7200
12 MB/s High-Speed 32-CH DI & 32-CH DO Card
■ PCIe-7200
12 MB/s High-Speed 32-CH DI & 32-CH DO
PCI Express® card
Pin Assignment
PCI/PCIe-7200
CN1
DI16 1 2 DO16
DI17 3 4 DO17
DI18 5 6 DO18
DI19 7 8 DO19
DI20 9 10 DO20
DI21 11 12 DO21
DI22 13 14 DO22
DI23 15 16 DO23
DI24 17 18 DO24
DI25 19 20 DO25
DI26 21 22 DO26
DI27 23 24 DO27
DI28 25 26 DO28
DI29 27 28 DO29
DI30 29 30 DO30
DI31 31 32 DO31
+5Vout 33 34 GND
O-ACK 35 36 O-TRG
O-REQ 37 38 N/C
N/C 39 40 N/C
DI0
DI1
DI2
DI3
DI4
DI5
DI6
DI7
DI8
DI9
DI10
DI11
DI12
DI13
DI14
DI15
+5Vout
I-ACK
I-REQ
CN2
1 20
2 21
3 22
4 23
5 24
6 25
7 26
8 27
9 28
10 29
11 30
12 31
13 32
14 33
15 34
16 35
17 36
18 37
19
DO0
DO1
DO2
DO3
DO4
DO5
DO6
DO8
DO7
DO9
DO10
DO11
DO12
DO13
DO14
DO15
GND
I-TRG
2-43 _{www.adlinktech.com}
Updated 03-28, 2012. ©2012 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.