PCI-7296 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – PCI-7296/7248/7224, PCIe-7296/7248 96/48/24-CH Opto-22 Compatible DIO Cards

Digital I/O
PCI-7296/7248/7224, PCIe-7296/7248
96/48/24-CH Opto-22 Compatible DIO Cards
PCI-7224
PCI-7296
Introduction
ADLINK's PCI-7296/7248/7224 and PCIe-7248/7296 are high-density parallel digital I/O boards with 96/48/24 I/O
channels. The header connectors are fully compatible with industry Opto-22 standard. Thus, PCI-7296/7248/7224
and PCIe-7248/7296 can utilize the Opto-22 external devices. The PCI-7296/7248/7224 and PCIe-7248/7296 devices
emulate mode 0 of the industry standard 8255 programmable peripheral interface (PPI) chips. The PCI-7296/7248/7224
and PCIe-7248/7296 provides 4/2/1 PPI chips respectively. Each PPI offers three 8-bit ports: Port A, Port B and Port C. The
Port C is divided into 2 nibble-wide (4-bit) ports. The PCI-7296/7248/7224 and PCIe-7248/7296 devices have
programmable timer/counters. One 16-bit counter is available for event counting, while the other 32-bit timer is available for
timed interrupt generation.
The PCI-7296/7248/7224 and PCIe-7248/7296 devices provide multiple programmable interrupt sources from DIO
channels, as well as the output of the timer.
Specifications
Ordering Information
PCI-7248
PCIe-7296
PCIe-7248
Features
■ Supports a 32-bit 5 V PCI bus (PCI-7224/7248/7296)
■ x1 PCI Express® interface (PCIe-7248/7296)
■ 96-CH digital TTL/DTL inputs/outputs (PCI/PCIe-7296)
■ 48-CH digital TTL/DTL inputs/outputs (PCI/PCIe-7248)
■ 24-CH digital TTL/DTL inputs/outputs (PCI-7224)
■ Emulates 4/2/1 industry standard 8255 PPI (mode 0)
■ Direct interface with OPTO-22 compatible I/O modules
■ Output status read back
■ Onboard 8254 timer/counter chip
■ One 32-bit timer for timed interrupt generation
■ One 16-bit event counter to generate event interrupt
■ Programmable interrupt sources
■ +12 V and +5 V power available on OPTO-22 connectors
■ Onboard resettable fuses for power output protection
■ Compact, half-size PCB
■ Operating Systems
• Windows Vista/XP/2000/2003
• Linux
■ Recommended Software
• AD-Logger
• VB.NET/VC.NET/VB/VC++/BCB/Delphi
• DAQBench
■ Driver Support
• DAQPilot for LabVIEW™
• DAQ-MTLB for MATLAB^®
• PCIS-DASK for Windows
• PCIS-DASK/X for Linux
Digital I/O
■ Number of channels
• 96 inputs/outputs (PCI/PCIe-7296)
• 48 inputs/outputs (PCI/PCIe-7248)
• 24 inputs/outputs (PCI-7224)
■ Compatibility: 5 V/TTL
■ Digital logic levels
• Input high voltage: 2-5.25 V
• Input low voltage: 0-0.8 V
• Output high voltage: 2.4 V minimum
• Output low voltage: 0.5 V maximum
■ Output driving capacity
• Source current: 2.6 mA for port A & B, and 15 mA
for port C.
• Sink current: 24 mA
■ Data transfers: programmed I/O
General Specifications
■ I/O connector
• 50-pin ribbon male x 1 (PCI-7224)
• 50-pin ribbon male x 2 (PCI/PCIe-7248)
• 50-pin ribbon male x 4 (PCI/PCIe-7296)
■ Operating temperature: 0ºC to 60ºC
■ Storage temperature: -20ºC to 80ºC
■ Relative humidity: 5% to 95%, non-condensing
■ Power requirements
Device
PCI-7296
PCI-7248
PCI-7224
PCIe-7248
PCIe-7296
Power Consumption
860 mA @ 5 VDC Typical
500 mA @ 5 VDC Typical
330 mA @ 5 VDC Typical
350 mA @ 12 VDC Typical
280 mA @ 3.3 VDC Typical
590 mA @ 12 VDC Typical
280 mA @ 3.3 VDC Typical
■ Dimensions (not including connectors)
• 148 mm x 102 mm (PCI-7248 and PCI-7224)
• 166 mm x 102 mm (PCI-7296)
• 168 mm x 112 mm (PCIe-7248/7296)
Terminal Boards
■ TB-24R-01*
Terminal Board with 24-CH Relay Outputs
■ TB-24P-01*
Terminal Board with 24-CH Isolated Digital Inputs
■ TB-16P8R-01*
Terminal Board with 16-CH Isolated DI & 8-CH
Relay Outputs
■ DIN-24R-01*
Terminal Board with 24-CH Relay Outputs
■ DIN-24P-01*
Terminal Board with 24-CH Isolated Digital
Inputs and DIN-Rail Mounting
■ PCI-7296
96-CH Opto-22 Compatible DIO Card
■ PCI-7248
48-CH Opto-22 Compatible DIO Card
■ PCI-7224
24-CH Opto-22 Compatible DIO Card
■ PCIe-7248
48-CH Opto-22 Compliant PCIe DIO Card
■ PCIe-7296
96-CH Opto-22 Compliant PCIe DIO Card
Note:
The PCI-7224 is the 24-CH version of the PCI-7248. The software
drivers of the PCI-7224 are exactly the same as those of the PCI-7248
Pin Assignment
PCI-7224/7248/7296 & PCIe-7248/7296
PnC7 1 2
PnC6 3 4
PnC5 5 6
PnC4 7 8
PnC3 9 10
PnC2 11 12
PnC1 13 14
PnC0 15 16
PnB7 17 18
PnB6 19 20
PnB5 21 22
PnB4 23 24
PnB3 25 26
PnB2 27 28
PnB1 29 30
PnB0 31 32
PnA7 33 34
PnA6 35 36
PnA5 37 38
PnA4 39 40
PnA3 41 42
PnA2 43 44
PnA1 45 46
PnA0 47 48
+5Vout 49 50
+12Vout/GND (User Selection)
+12Vout/GND (User Selection)
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
* Cables are not included. For more information about mating
cables, please refer to P2-61/62.
2-55 _{www.adlinktech.com}
Updated 03-28, 2012. ©2012 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.