English
Language : 

PCI-6308 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 8-CH 12-Bit Isolated Analog Output Cards
PCI-6308V/6308A
8-CH 12-Bit Isolated Analog Output Cards
Analog Output
PCI-6308A
Introduction
The PCI-6308V is a high-performance 12-bit analog output board with PCI interface. It provides 8 identical voltage
output channels, with each channel capable of bipolar voltage outputs, unipolar voltage output and unipolar
0 to user defined voltage output. The PCI-6308V provides good monotonicity, low distortion, and low differential
linearity error over long periods of time. The output ranges of the PCI-6308V are bipolar -10 to +10 V, unipolar
0 to 10 V and as well as user-defined ranges with external reference input, which are jumper selectable. The PCI-
6308A device is the combination of the PCI-6308V with an 8-CH current output extended board, EXP-8A. The
EXP-8A board includes 8 precision voltage-to-current converters.
ADLINK PCI-6308 series devices provide flexible and isolated analog output functionalities and are suitable for
ATE, signal generation, industrial process control, servo control and other industrial control applications.
Features
■ Supports a 32-bit 5 V PCI bus
■ 12-bit D/A resolution (PCI-6308V & PCI-6308A)
■ Isolated 8-CH 12-bit voltage output
(PCI-6308V & PCI-6308A)
■ Isolated 8-CH 12-bit current output (PCI-6308A)
■ Bipolar or unipolar output ranges
■ External reference input for user-defined ranges
■ 4-CH isolated digital outputs and 4-CH isolated digital inputs
■ 2500 VRMS optical isolation
■ Compact, half-size PCB
■ Operating Systems
• Windows 7/Vista/2000/XP/Server 2003
• Linux
■ Recommended Software
• AD-Logger
• VB.NET/VC.NET/VB/VC++/BCB/Delphi
• DAQBench
■ Driver Support
• DAQPilot for LabVIEW™
• DAQ-MTLB for MATLAB®
• PCIS-DASK for Windows
• PCIS-DASK/X for Linux
Specifications
Isolated Analog Output
■ Number of channels: 8 voltage outputs
(PCI-6308V & PCI-6308A)
■ Resolution: 12 bits
■ Output ranges (jumper selectable)
Input Range
Bipolar
Unipolar
±10 V
0 to 10 V, 0 to EXTREF
■ Settling time: 16 μs (20 V step)
■ Maximum update interval:
90 μs for four channels simultaneously
■ Gain error: ±0.2 % max.
■ DNL: ±1 LSB
■ Output driving capacity: ±5 mA
■ Isolation voltage: 2500 VRMS
■ Output initial status:
0 V (after RESET or POWER-ON)
■ Data transfers: programmed I/O
Current Output (PCI-6308A)
■ Number of channels: 8
■ Resolution: 12 bits
■ Output ranges (software programmable):
0-20 mA, 4-20 mA, and 5-25 mA
■ Gain error: 0.3%
■ Settling time: 17 μs (0-20 mA)
■ Slew rate: 1.3 mA/μs
■ DNL: ±1 LSB maximum
■ Output resistance: 10 GΩ typical
■ Current load resistance: 0 - 500 Ω
■ Output initial status:
4 mA (after RESET or POWER-ON)
■ Data transfer: programmed I/O
Isolated Digital Input
■ Number of channels: 4
■ Maximum input range: 24 V, non-polarity
■ Digital logic levels
• Input high voltage: 5 - 24 V
• Input low voltage: 0 - 1.5 V
■ Input resistance: 2.4 kΩ @ 0.5 W
■ Isolation voltage: 2,500 VRMS
■ Data transfers: programmed I/O
Isolated Digital Output
■ Number of channels: 4 (PCI-6308V & PCI-6308A)
■ Output type: photo-coupler transistors
■ Supply voltage: 5 to 35 V
■ Isolation voltage: 2,500 VRMS
■ Data transfers: programmed I/O
General Specifications
■ I/O connector: 37-pin D-sub female
■ Operating temperature: 0˚C to 55˚C
■ Storage temperature: -20˚C to 80˚C
■ Relative humidity: 5% to 95%, non-condensing
■ Power requirements
Device
PCI-6308V
PCI-6308A
+5 V
220 mA typical
220 mA typical
+12 V
175 mA typical
250 mA typical
530 mA maximum
Terminal Boards & Cables
■ DIN-37D-01
Terminal Board with One 37-pin D-sub Connector
and DIN-Rail Mounting (Cables are not included.)
■ ACLD-9137-01
General-Purpose Terminal Board with One 37-pin
D-sub Male Connector
■ ACL-10137-1MM
37-pin D-sub male/male cable, 1 M
■ ACL-10137-1MF
37-pin D-sub male/female cable, 1 M
* For more information on mating cables, please refer to
P2-61/62.
Ordering Information
■ PCI-6308V
8-CH 12-Bit Isolated Voltage Output Card
■ PCI-6308A
8-CH 12-Bit Isolated Voltage & Current
Output Card
Pin Assignment
DI3 1
DI2 2
DI1 3
DI0 4
DIGND 5
ExtVref 6
+15Vout 7
AGND 8
A6 9
V6 10
AGND 11
A4 12
V4 13
AGND 14
A2 15
V2 16
AGND 17
A0 18
V0 19
20 DO3
21 DO2
22 DO1
23 DO0
24 DOGND
25 -15Vout
26 AGND
27 A7
28 V7
29 AGND
30 A5
31 V5
32 A.GND
33 A3
34 V3
35 AGND
36 A1
37 V1
■ Dimensions (not including connectors)
175 mm x 107 mm
Updated 03-28, 2012. ©2012 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.
www.adlinktech.com 2-32