|
PCI-6202 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 4-CH 16-Bit 1 MS/s Analog Output & 32-CH Isolation DIO Card | |||
|
PCI-6202
4-CH 16-Bit 1 MS/s Analog Output & 32-CH Isolation DIO Card
Introduction
The ADLINK PCI-6202 is a 4-CH, 16-bit high resolution voltage output card with hardware timed waveform
generation. Four analog output channels can update simultaneously and support up to 1 MS/s update rate per
channel. The PCI-6202 features excellent linearity (DNL < 1 LSB), which is suitable for dynamic signal simulation
and control applications requiring high accuracy through voltage output. Furthermore, the PCI-6202 provides
additional I/O control lines for system integration, such as 16-CH isolated digital input and 16-CH isolated
output, 8-CH TTL DI and 8-CH TTL DO, 3-CH encoder inputs, and 4-CH PWM outputs. Combined, these I/O
functionalities, solid voltage output linearity, and high accuracy, make the PCI-6202 the best single-board solution
for both equipment manufacturers and laboratory research applications.
Features
â Supports a 32-bit 3.3 V or 5 V PCI bus
â Hardware-based waveform generation
â DNL Linearity less than 1 LSB
â Digital triggering for waveform generation
â 16-CH isolation digital inputs & 16-CH isolation digital
outputs
â 8-CH TTL DI and 8-CH TTL DO
â 2-CH timer/counter, base clock: 40 MHz
â 4-CH PWM output
â 3-CH encoder inputs, supporting AB phase and CW/CCW
â Multiple card synchronization through SSI
(System Synchronization Interface) bus
â Operating Systems
⢠Windows 7/Vista/2000/XP/Server 2003
⢠Linux
â Recommended Software
⢠AD-Logger
⢠VB.NET/VC.NET/VB/VC++/BCB/Delphi
⢠DAQBench
â Driver Support
⢠DAQPilot for LabVIEWâ¢
⢠DAQ-MTLB for MATLAB®
⢠PCIS-DASK for Windows
⢠PCIS-DASK/X for Linux
Specifications
Analog Output
â Resolution: 16 bits
â Number of channels: Four (simultaneous update)
â Maximum update rate: 1 MS/s
â FIFO buffer size: 8k Samples (4-CH Sharing)
â Output range: ±10 V
â DNL: Less than ±1 LSB
â Offset Error: 0.3 mV
â Positive Gain Error: 0.3 mV
â Negative Gain Error: 0.3 mV
â Settling Time: 3 μs
â Slew Rate: 20 V/μs
â Rise Time: 0.67 μs
â Falling Time: 0.705 μs
â Output Current Capacity: 5 mA
â Trigger source: Software, External digital, SSI bus
â Data Transfer: Software polling, DMA
Isolated Digital Input
â Number of channels: 16
â Maximum input range: 24 V, non-polarity
â Digital logic level
⢠Input high voltage: 10-24 V
⢠Input low voltage: 0-1.5 V
â Isolation voltage: 2500 VRMS
Isolated Digital Output
â Number of channels: 16
â Sink current limitation: 250 mA for one channel @
100% duty
â Supply voltage: 5-35 VDC
â Isolation voltage: 2500 VRMS
Encoder Input
â Number of channels: Three Encoder type
⢠CW/CCW encoder
⢠x1 AB phase encoder
⢠x2 AB phase encoder
⢠x4 AB phase encoder
Function I/O
â Digital I/O: Eight DO (3.3 V TTL Level)/Eight DI
(3.3 V or 5 V TTL Level)
â General Timer/Counter: Two 32-bit, Base clock:
80 MHz, external to 10 MHz
â Pulse Generation: Four PWM Outputs
⢠Single pulse generation
⢠Pulse train generation
â AFI0/AFI1: D/A Convert Clock or Start Trigger
General Specifications
â PCI Bus: 5 V and 3.3 V universal PCI bus
â I/O Connector: Two 68-pin SCSI-VHDCI female
â Operation temperature: 0ËC to 55ËC
â Storage temperature: -20ËC to 70ËC
â Relative humidity: 5% to 95%, non-condensing
â Power requirements:
+5 V
500 mA typical
+12 V
110 mA typical
â Dimensions: 175 mm x 107 mm
(not including connectors)
2-33 www.adlinktech.com
|
▷ |