PA40DX-44QF-34 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 40 pin DIP socket/44 pin QFP plug

PA40Dx-44QF-34 Data Sheet
40 pin DIP socket/44 pin QFP plug
Supported Device/Footprints
These adapters accept 40 pin DIP devices and have a
removable 44 pin QFP solder-down plug. They allow DIP
devices, or emulators with DIP plugs, to be used during
development of QFP based products.
The following DIP device footprints are converted to the
indicated QFP footprint.
Zilog: Z86C34/ C35/ C36/ C44/ C45/ C46
Footprint: Same device 44QFP
Other devices that require the same wiring and footprint would
also be supported.
This QFP plug will fit most 44 pin. 0.8mm pitch, QFP land
patterns. Usually the pads extend from the body past the tip of
the device leads. This plug will fit on pads that have a minimum
span of 10.0mm or less and a maximum span of 12.0mm or
more.
Inner pad span Outer pad span
10.0mm or less 12.0mm or more
The QFP Plug’s leads are dimensioned as follows.
Adapter Construction
The adapter is made up of 3 or 4 sub-assemblies. They
assemble via connectors making the adapter modular. This way
the sub-assemblies can be replaced easily.
When disassembling the adapter take care not to bend the pins.
When reassembling the adapter note the pin 1 indicators to align
the parts correctly.
The following chart lists the adapters described by this datasheet
and their subassemblies.
Adapter
Test
Socket
Board
QFP
Plug
PA40DZ-44QF-34 40-ADZ * PA51-DP-34Q PQF-44
PA40DP-44QF-34 none * PA51-DP-34Q PQF-44
* The top board always has a 40 pin DIP production socket. The
optional test socket plugs into the production socket.
Test Socket
LSC #
40ADZ
Style
DIP ZIF
Mfgr/Pn
Aries 40-6554-11
Adapter Wiring
The following chart shows the connections from the DIP device
to the adapter’s QFP plug.
Plug
PQF-44
Body
10.0 mm typ
Knee
9.6 mm typ
Adapter Dimensions
Tip
Pitch
12.0 mm typ 0.8 mm
PA40DP-44QF-34
DIP
Socket
1
2
3
4
5
6
7
8
9
10
11
11
12
13
14
15
16
17
18
19
20
-
SIGNAL
R/W
P25
P26
P27
P04
P05
P06
P14
P15
P07
Vcc
Vcc
P16
P17
XTAL2
XTAL1
P31
P32
P33
P34
AS
R/RL
QFP
Plug
40
41
42
43
44
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
QFP
Plug
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
SIGNAL
N/C
DS
P24
P23
P22
P21
P20
P03
P13
P12
GND
GND
P02
P11
P10
P01
P00
P30
P36
P37
P35
RESET
DIP
Socket
-
40
39
38
37
36
35
34
33
32
31
31
30
29
28
27
26
25
24
23
22
21
Skip short notation (1, 12, 23, 34) (12-13), (34-35) using “header” pin
numbers.
PA40DZ-44QF-34
Logical Systems Corporation
PO Box 6184, Syracuse, NY 13217-6184 USA
Tel [phone], FAX [phone]
S Y S T E M S _{www.logicalsys.com, Email: [e-mail]}
PA40Dx-44QF-34 Data Sheet
Doc: 404434DQ.DOC
Rev 02/09/00
Page 1 of 1