PA32-32 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – PA32-32(Z) Data Sheet

PA32-32(Z) Data Sheet
32 pin PLCC socket/32 pin DIP 0.6” plug
Supported Device/Footprints
This adapter allows programming of many 32 pin PLCC, CLCC
and LCC devices in their 32 pin DIP footprint.
The CLCC package has J leads. The LCC package is leadless.
Both packages are ceramic. The LCC package is supported by
the PA32-32Z when a shim is used. See the LCC Package
Support section.
The following devices are supported using the indicated footprint.
Generic: 27x010, 27x020, 27x040, 27x080, 27x101, 27x201,
27x401, 29F100
Footprint: Same device 32DIP 0.6”
Adapter Dimensions
Adapter Construction
The adapter is made up of 2 sub-assemblies. They assemble via
connectors making the adapter modular. This way the sub-
assemblies can be replaced when they wear out.
When disassembling the adapter take care not to bend the pins.
When reassembling the adapter note the pin 1 indicators to align
the parts correctly.
The following chart shows the various socket and board part
numbers that make up these adapters.
Adapter
PA32-32
PA32-32Z
Socket
32-309
32-453
Board
PA32-32 Ver D
PA32-32Z Ver C
Test Sockets
LSC #
Style
32-309
Auto-Eject
32-453
Lidded ZIF
Mfgr/Pn
Yamaichi IC120-0324-309
Yamaichi IC51-0324-453
PA32-32
PA32-32Z
Adapter Wiring
This adapter is wired 1 to 1. The following chart shows the
connections from the PLCC device to the adapters DIP plug.
DEVICE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PLUG
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PLUG
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
DEVICE
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
LCC (Leadless) package support
The test socket on the PA32-32Z can accommodate the LCC
package. A shim must be used to make up the difference in
thickness between the PLCC and LCC packages. The shim can
be ordered using part number SHIM32-453 or it can be made.
The shim should be between 0.023” and 0.030” thick and cut to
a size of 3/8” by 5/8”. It should be affixed to the inside of the
cover of the socket. Test close the socket, without a device, to
confirm the shim does not interfere with the interlocking parts of
the socket.
Logical Systems Corporation
PO Box 6184, Syracuse, NY 13217-6184 USA
Tel [phone], FAX [phone]
S Y S T E M S _{www.logicalsys.com, Email: [e-mail]}
PA32-32(Z) Data Sheet
Doc: 32-32ZR.DOC
Rev 7/12/99
Page 1 of 1