P6158 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – 20X Low Capacitance Probe

20X Low Capacitance Probe
P6158 Data Sheet
P6158 DC to 3 GHz
The P6158 is a 3 GHz, 20X, low-capacitance probe. The P6158 is ideal
for high-speed applications because of its ability to extend high-frequency
response to 3 GHz. The BNC connector incorporates encoding to correct
scale factors for 20X attenuation in oscilloscopes with TEKPROBE® power
supply interface. To facilitate SMD probing, the P6158 comes standard
with SureFoot® adapters. Additionally, the probe comes standard with an
array of short ground leads that insert minimal inductance into the signal
path of the measured waveform. The compact probe head/tip assembly is
compatible with the full line of 3.5 mm probe accessories. Designed for the
TDS500/600/700/5000/6000/7000 Series oscilloscopes, the P6158 probe
may also be used with 50 Ω 11000 Series plug-ins and the 11800 Series
SD2X Sampling/TDR plug-ins with BNC to SMA Adapters.
P6158.
Features & Benefits
3 GHz Bandwidth
1.5 pF Input Capacitance
1 kΩ Input Resistance
22 V_RMS Max. Input Voltage
Activates 20X Readout in TEKPROBE™ Interface Instruments
Compact Probe Tip Compatible with a Wide Range of Tektronix
Accessories and Adapters
Applications
High-speed Device Characterization
Propagation Delays for ECL, CMOS and Other Logic Circuitry and
Devices
Circuit Board Impedance Testing (TDR)
High-speed Sampling Systems
Characteristics
Bandwidth (Probe Only) – DC to 3 GHz, -3 dB.
Rise Time – >100 ps.
Attenuation – x20 (-26 dB).
Attenuation Accuracy – ±3%.
Input C – 1.5 pF.
Input R – 1 kΩ.
Output Termination – Terminate into 50 Ω.
Signal Delay – 5 ns.
Physical Characteristics
Probe Tip/Head Style – 3.5 mm/Compact.
Output Cable Length – 1.2 m.
Environmental Characteristics
Temperature – Operating: -15 °C to +55 °C (+5 °F to +131 °F).
Humidity –
High operating: 55 °C @ 95 to 97% RH.
Low operating: 30 °C @ 95 to 97% RH.