P603 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – SMP MALE STRAIGHT PCB MOUNT

4
3
PART APPLICABLE
NO. NOTE(S)
INTERFACE(S)
(Ø A)
FIGURE(S)
-1CC
-2CC
D ^-3CC
-4CC
1,2,3
1,2,3
1,2,3
1,2,3
FULL DETENT
.116
LIMITED DETENT
.120
SMOOTH DETENT
.125
CATCHER MITT'S
.125
FIG. 1
FIG. 1
FIG. 1
FIG. 2
2
1
REVISIONS
REV
DESCRIPTION
C
ECO 12288
D
ECO 12856
E
ECO 20006 (REDRAW IN SW)
DATE
10.02.00
03.02.01
03.01.07
BY
IMG
HDB
YP
D
4X
.037
.035
.076
.074
.021
.019
2X
.150
.148
C
C
RECOMMENDED MOUNTING
HOLE PATTERN
MATERIAL:
Insert:
303 sst per ASTM A-582
Body & Center Conductor:
BeCu alloy per ASTM B-196
Insulator:
B
PTFE per ASTM D-1710
ELECTRICAL:
Impedance: 50 Ohms Nom.
Freq. Range: DC TO 12 GHz
VSWR: 1.25:1 max to 12GHz
Insertion Loss: .10 dB max to 12GHz
Working Voltage: 335 Vrms @ Sea Level
Dielectric Withstand Voltage: 500 Vrms min
RF HiPot Voltage: 325 Vrms Min @ 5MHz
Corona Level: 125 Vrms @ 70,000 ft
Insulation Resistance: 5000 Mohms
Contact Resistance:
Center Conductor: 6.0 Milliohms max
Outer Conductor: 2.0 Milliohms max
RF Leakage: -80 dB max to 3GHz
-65 dB max to 18GHz
MECHANICAL:
Interface Dimensions:
Consult Factory
Connector Durability:
100 Cycles min - Full Detent
500 Cycles min - Limited Detent
1000 Cycles min - Catchers Mitt
Center Contact Retention:
2 lbs Min Axial
N/A Radial
Force to Engage:
15 pounds max - Full Detent
10 pounds max - Limited Detent
2 pounds max - Catchers Mitt
Force to Engage:
5 pounds min - Full Detent
2 pounds min - Limited Detent
.5 pounds min - Catchers Mitt
Permeability: Less than 2.0 mu.
ENVIRONMENTAL:
Temp. Range: -65°C to +165°C
Thermal Shock:
MIL-STD-202, Method 107, Test Cond. B
Moisture Resistance:
MIL-STD-202, Method 106, except step 7b
shall be omitted. Insulation resistance at least
B
100 MegaOhms within 5 minutes after removal
from humidity.
Corrosion:
MIL-STD-202, Method 101, Test Cond. B
Vibration:
MIL-STD-202, Method 204, Test Cond. D
Shock:
MIL-STD-202, Method 213, Test Cond. I
FINISH:
A Insert:
Passivate per ASTM A-967.
Body & Center Conductor:
Gold plate per ASTM B-488, over Nickle plate per AMS-QQ-N-290.
ENG-DWG REV. A ₄
3
APPLICABLE TENSOLITE DOCUMENTS
TOLERANCES AND NOTES
EXCEPT AS NOTED
SEE NOTE(S)
-
SEE NOTE(S)
-
WORK STANDARD PROD INSTRUC
NA
NA
ASSY INSTRUC
NA
DIMENSIONS ARE IN INCHES.
LINEAR
.XX ±.015
.XXX ±.005
ANGULAR ± 1/2°
FRACTION ± 1/32
1. MACHINE FINISH: 63 RMS
MATERIAL
APPROVAL INITIALS
DATE
DRAWN BY YPHAN 03.01.07
SIZE
SPECIFICATION
PROCUREMENT
Tensolite HIGH PERFORMANCE CABLES
& INTERCONNECT SYSTEMS
A
2400 Grand Avenue
Long Beach, California 90815-1762
NOTICE
THIS DRAWING EMBODIES A CONFIDENTIAL PROPRIETARY DESIGN
2. BREAK ALL SHARP EDGES .003 MAX.
.005 3. MACHINED FILLETS
MAX.
CHECKED BY
TEST ENGR
ORIGINATED BY TENSOLITE COMPANY AND ALL DESIGN, MANUFACTURING 4. MACHINED SURFACES SQUARE TO RESPECTIVE
TITLE
SMP MALE STRAIGHT
PCB MOUNT
REPRODUCTION, USE AND SALE RIGHTS REGARDING THE SAME ARE
AXIS WITHIN .005 INCHES PER INCH.
QUALITY
EXPRESSLY RESERVED. IT IS SUBMITTED UNDER A CONFIDENTIAL
5. MACHINED DIAMETERS CONCENTRIC WITHIN
SCALE
SUB-DIRECTORY\FILE NAME
RELATIONSHIP FOR A SPECIFIED PURPOSE AND THE RECIPIENT AGREES
.002 T.I.R.
BY ACCEPTING THIS DRAWING NOT TO SUPPLY OR DISCLOSE ANY 6. DIMENSIONS TO BE MET BEFORE PLATING.
INFORMATION REGARDING IT TO ANY UNAUTHORIZED PERSON TO 7. CHAMFER ALL THREADS 45°.
INCORPORATE IN OTHER PROJECTS ANY SPECIAL FEATURES PECULIAR 8. THREADS PER H-28
DESIGN ENGR DNG
MFG. ENGR
07.23.07
14:1 OLP
SIZE CAGE CODE DRAWING NO.
1 SHEET OF
2
REV.
TO THIS DESIGN. ALL PATENT RIGHTS HERETO ARE EXPRESSLY
RESERVED BY TENSOLITE COMPANY, LONG BEACH, CALIFORNIA 90815.
9. REMOVE FRAYED EDGES ON TEFLON.
10. REMOVE ALL BURRS.
C 30990
P603
E
2
1