P3100-C-S Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Important safety information

Important safety information:
Disconnect power before installing light(s) and always ensure power is off before making any changes to
installation.
Wear rubber soled shoes.
To avoid a hazard to children, account for all parts and destroy all packing materials.
If you are unsure about the installation or use of the Califia Lighting power supply, consult a qualified
electrician.
Power supply must be installed according to the National Electrical Code and local building codes.
Operation:
Do not install any fixture closer than 6” from any curtain or similar combustible material.
Intended to be connected only to 24VDC output of a class 2 power supply. Do not exceed nominal
supply voltage.
CAUTION: To reduce risk of fire and electrical shock, use only fixtures and fittings intended for use with
this Califia Lighting track system.
CAUTION: Do not exceed 24VDC and 25A capacity of surface track (600 Watts at 24 volts).
Standard Individual Light:
Option A – Screw Mount: Hold the luminaire up to the desired mounting location. Using a level to
ensure the fixture is mounted straight, locate the mounting holes and endcap, tighten the screws
provided into both ends of the luminaire.
Option B – Double Sided Tape Mount: Hold the luminaire up to the desired mounting location. Using a
level to ensure the fixture is mounted straight, place a piece of double sided tape on both ends and in
the center of the fixture and affix to the desired location.