P300E-5 Datasheet, PDF (1/18 Pages) List of Unclassifed Manufacturers – Ordering information

P
R
Unit type
P15E
Ordering information
P
1
15 E
2
3
-5 -O
4
5
1Series name
2Output wattage
3UL recognized,TuV
approved,
CSA certified:E
4Output voltage
5Optional *3
C :with Coating
G :Low leakage current
J :Connector type
N :with Cover
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
P15E-5
15
5V 3A
P15E-9
15.3
9V 1.7A
P15E-12
15.6
12V 1.3A
P15E-15
15
15V 1A
P15E-18
16.2
18V 0.9A
P15E-24
16.8
24V 0.7A
P15E-30
15
30V 0.5A
P15E-48
16.8
48V 0.35A
SPECIFICATIONS
MODEL
P15E-5
P15E-9
P15E-12 P15E-15 P15E-18 P15E-24 P15E-30 P15E-48
VOLTAGE[V]
CURRENT[A]
AC85 - 264 1f or DC110 - 370
ACIN 100V*¹ 0.3typ (Io=100%)
ACIN 200V*¹ 0.18typ (Io=100%)
INPUT
FREQUENCY[Hz]
47 - 440 or DC
EFFICIENCY[%]
73typ
75typ
79typ
ACIN 100V 20typ (Io=100%) (At cold start)
INRUSH CURRENT[A] _{ACIN 200V 40typ (Io=100%) (At cold start)}
81typ
81typ
81typ
81typ
81typ
VOLTAGE[V]
5
9
12
15
18
24
30
48
CURRENT[A]
3.0
1.7
1.3
1.0
0.9
0.7
0.5
0.35
MAX OUTPUT WATTAGE[W] 15.0
15.3
15.6
15.0
16.2
16.8
15.0
16.8
LINE REGULATION[mV] 20max
36max
48max
60max
72max
96max
120max 192max
LOAD REGULATION[mV] 40max
70max
100max 120max 140max 150max 180max 380max
OUTPUT RIPPLE[mVp-p]
*2 80max
120max 120max 120max 120max 120max 120max 150max
RIPPLE NOISE[mVp-p] *² 120max 150max 150max 150max 150max 150max 150max 250max
TEMPERATURE REGULATION[mV] 0 to +50C 50max
90max
120max 150max 180max
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] t10%
START-UP TIME[ms]
100max (ACIN 85V, Io=100%)
HOLD-UP TIME[ms]
10typ (ACIN 85V, Io=100%) 20typ (ACIN 100V, Io=100%)
240max
300max
480max
PROTECTION ^{OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically}
CIRCUIT _{OVERVOLTAGE PROTECTION Works at 115 - 140% of rating}
INPUT-OUTPUT
AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature)
ISOLATION INPUT-FG
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature)
OUTPUT-FG
AC500V 1minute, Cutoff current = 100mA, DC500V 50MWmin (At Room Temperature)
OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +65C, 30 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE
ENVIRONMENT
VIBRATION
-20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max
10 - 55Hz, 19.6m/s² (2G), 3minutes period, 30minutes each along X, Y and Z axis
IMPACT
196.1m/s² (20G), 11ms, once each X, Y and Z axis
SAFETY AND _{AGENCY APPROVALS}
NOISE
REGULATIONS CONDUCTED NOISE
UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1
Complies with FCC-B
*1 The input current of the agency approved unit is indicated as 0.4A.
*2 According to 15MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101).
*3 Please contact us about safety approvals for the model with option.
* Derating is required when operated with case cover.
* Parallel operation with other model is not possible.
A-72