P-306-DB Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Multiple Density Solder Eyelet

Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet
■ Solder lug terminals with .093" x .062" (2.36mm x 1.57mm) wiring holes.
■ Two-contact "Jones" connector is round, all others are rectangular.
■ For use in cable-to-panel and cable-to-cable applications.
■ Designed for light and medium duty.
■ Plug prongs are .156" (3.96mm) wide and .047" (1.19mm) thick.
■ Polarized to prevent wrong-way insertion.
■ Plugs have projecting flat blades, sockets have recessed twin bellows.
■ Cable clamps of zinc and clear irridite-plated steel used for strain relief.
■ UL Recognized-file E170218 (UL 1977), E130965 (UL1863).
■ CSA-LR31996.
■ See Panel Cutout dimension on page (2-38).
Insulation Material: Molded monoblock, general purpose
phenolic, black UL94V-1
Contact Material: Plug: Brass
Socket: Phosphor bronze
Contact Plating: Cadmium
Operating Temperature: Up to +105°C
Hood Material: UL 94V-0 rated thermoplastic
Operating Voltage:
Current Rating:
Contact Resistance:
250 VAC RMS maximum
10 Amps
16 Milliohms maximum
Call Toll Free: 1 [phone]
2-36
Marketed exclusively through distribution.