OPB912W55Z Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Photologic Slotted Optical Switch

Photologic^® Slotted Optical Switch
“Wide Gap” Series
OPB900 through OPB913 Series (L, W__Z)
Features:
• 0.375” (9.5 mm) wide gap
• Choice of logical output configurations
• Choice of opaque or IR transmissive housing material
• Choice of PCBoard or 26 AWG, UL rated wire
• Data rates to 250 kBaud
L Series
Product Photo^WH^Se^errⁱe^es
Description:
The OPB900 - OPB913 series of Photologic® Integrated Circuit Switches provide optimum flexibility for the design
engineer. Building from a standard housing with a 0.375” (9.5mm) wide slot, a user can specify the type and
polarity of the TTL output and the type of shell material.
Electrical output can be specified as either TTL Totem Pole (buffered) or TTL Open Collector, either of which can
be supplied with an inverted output polarity.
All versions have the added stability of hysteresis built into the amplification circuitry.
Applications:
• Mechanical switch replacement
• Speed indication (tachometer)
• Mechanical limit indication
• Edge sensing
• Object sensing
Part Number Guide — OPB900 Series (L, W)
OPB9_ _ _ _ _ _
0 = Dust protection with apertures
1 = Open apertured
L55 = Solder lead termination (PCBoard mount)
0 = Totem Pole
1 = Open Collector
2 = Inverted Totem Pole
3 = Inverted Open Collector
W5_Z= 26 AWG wire termination (24” [61cm] long)
Aperture sizes:
1 = 0.010” (0.25 mm)
5 = 0.050” (1.52 mm)
TotTeomte-PmolPe-oOleutOputput
OpenOCpoelnle-CctoollrecOtourtp-Ouut tput
Inverted Totem-PoIlneverted Output SerIinevserted Open Collector
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A.2 09/06
Page 1 of 4