English
Language : 

OMNI1000ISO Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – OmniSmart 1000VA Tower Line-Interactive 120V UPS with built-in Isolation Transformer and USB port
OmniSmart 1000VA Tower Line-Interactive 120V
UPS with built-in Isolation Transformer and USB
port
MODEL NUMBER: OMNI1000ISO
Highlights
1000VA / 1kVA tower 120V line
interactive UPS with isolation
transformer
Corrects brownouts and
overvoltages from 81V to 143V
USB port, Normal & common
mode EMI/RFI line noise immunity
NEMA 5-15P input plug and 6
5-15R outlets
Package Includes
OMNI1000ISO UPS System
USB cable
Instruction manual
Description
Tripp Lite's OMNI1000ISO offers complete UPS protection with built-in line-interactive voltage regulation, intelligent monitoring and unattended shutdown
capability. Built-in isolation transformer with Faraday shield offers full isolation and complete common mode noise rejection. 1000VA power-handling capacity
supports point-of-sale applications, computers, internetworking equipment and home theater systems during commercial power failures. Line-interactive
voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V back to normal 120V levels, reserving battery power for use during
complete power failures. Built-in USB communications port works with PowerAlert Software and cabling to provide automatic unattended shutdown of
connected network and PC applications.
Features
1000VA line-interactive UPS with Faraday-shielded, low-impedance isolation transformer delivers full isolation from potential damage and performance
problems
Provides immunity from EMI/RFI line noise in both normal and common modes. Delivers clean signal-reference ground, reducing data errors and
audio/video distortion
Automatic voltage regulation (AVR) automatically corrects incoming voltage to keep equipment working through low voltage (brownouts) as low as 81V
and overvoltages as high as 143V without consuming battery power
Supports loads up to 1000VA/700W
Half-load runtime of 24 min. (500VA/350W); full load runtime of 8 min. (1000VA/700W)
5 diagnostic LEDs indicate AC present, on battery, voltage correction status, overload and battery low/replace
Electrostatic discharge (ESD) resistance reduces potential static damage to connected electronics
Built-in USB port and PowerAlert Software (free via web download) provide safe, unattended system shutdown during extended blackouts
Built-in surge suppression (backed by $200,000 Ultimate Lifetime Insurance) safeguards connected equipment against damage
SURGE VOLTAGE WITHSTAND CAPABILITY: ANSI/IEEE C62.41 Catagories A & B 6KV/200/500 amp 100Khz Ringwave and category B BiWave
SURGE VOLTAGE ATTENUATION: N-G 2000:1, L-G 240:1, L-N 100:1
INSERTION LOSS: 65 db N-G from 10Khz to 100Khz, 45 to 60 db L-G from 10Khz to 100Khz, 18 to 54 db L-N from 50Khz to 500 Khz
6 UPS-supported AC outlets; 6-ft. cord
1/5