NUCLEO-F207ZG Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – STM32 Nucleo-144 board

NUCLEO-XXXXZX
STM32 Nucleo-144 board
Features
 STM32 microcontroller in LQFP144 package
 Two types of extension resources:
– ST Zio connector including: support for
Arduino^™ Uno Revision 3 connectivity (A0
to A5, D0 to D15) and additional signals
exposing a wide range of peripherals (A6 to
A8, D16 to D72)
– ST morpho extension pin header footprints
for full access to all STM32 I/Os
 ARM^® mbed^™ -enabled (see http://mbed.org),
planned for the second quarter of 2016
 On-board ST-LINK/V2-1
debugger/programmer with SWD connector:
– Selection-mode switch to use the kit as a
standalone ST-LINK/V2-1
– USB re-enumeration capability. Three
different interfaces supported on USB:
virtual com port, mass storage, debug port
 Flexible board power supply:
– 5V from ST-LINK/V2-1 USB VBUS
– External power sources: 3.3 V and 7 - 12 V
on ST Zio or ST morpho connectors, 5 V on
ST morpho connector
 USB OTG or device full speed with Micro-AB
connector (depending on STM32 support)
 IEEE-802.3-2002 compliant Ethernet
connector (depending on STM32 support)
 Three user LEDs
 Two push buttons: USER and RESET
 LSE crystal:
– 32.768KHz crystal oscillator
 Comprehensive free software HAL library
including a variety of software examples
 Supported by wide choice of Integrated
Development Environments (IDEs) including
IAR^™, Keil^®, GCC-based IDEs, ARM^® mbed^™
Data brief
1. Picture not contractual
Description
The STM32 Nucleo-144 board provides an
affordable and flexible way for users to try out
new concepts and build prototypes with the
STM32 microcontroller, choosing from the various
combinations of performance, power
consumption and features. The ST Zio connector,
which is an extension of Arduino^™ Uno, provides
access to more peripherals and ST morpho
headers make it easy to expand the functionality
of the Nucleo open development platform with a
wide choice of specialized shields. The STM32
Nucleo-144 board does not require any separate
probe, as it integrates the
ST-LINK/V2-1 debugger/programmer and it
comes with the STM32 comprehensive software
HAL library, together with various packaged
software examples, as well as a direct access to
the ARM^® mbed^™ online resources.
Table 1. Device summary
Reference
NUCLEO-XXXXZX
Part number
NUCLEO-F207ZG, NUCLEO-F303ZE,
NUCLEO-F429ZI, NUCLEO-F446ZE,
NUCLEO-F746ZG.
December 2015
DocID028659 Rev 1
For further information contact your local STMicroelectronics sales office.
1/4
www.st.com