NJM79L05UA-TE1 Datasheet, PDF (1/7 Pages) List of Unclassifed Manufacturers – 3-TERMINAL NEGATIVE VOLTAGE REGULATOR

NJM79L00
3-TERMINAL NEGATIVE VOLTAGE REGULATOR
■ GENERAL DESCRIPTION
The NJM79L00 series of 3-Terminal Negative Voltage Regulators
is constructed using the New JRC Planar epitaxial process. These
regulators employ internal current-limiting, and thermal-shutdown,
making them essentially indestructible. If adequate heat sinking is
provided, they can deliver up to 100mA output current. They are
intended as fixed voltage regulators in a wide range of applications
including local or on-card regulation for elimination of noise and
distribution problems associated with single-point regulation. In
addition, they can be used with power pass elements to make
high-current voltage regulators. The NJM79L00 used as a Zener
diode/resistor combination replacement, offers an effective output
impedance improvement of typically two orders of magnitude, along
with lower quiescent current and lower noise.
■ PACKAGE OUTLINE
1 ²³
NJM79L00UA (SOT-89)
1. COMMON
2. IN
3. OUT
■ FEATURES
• Internal Short Circuit Current Limit
• Internal Thermal Overload Protection
• Excellent Ripple Rejection
• Guarantee'd 100mA Output Current
• Output Capacitor recommended electrolytic capacitor
• Package Outline
SOT-89
• Bipolar Technology
■ EQUIVALENT CIRCUIT
Ver.2012-05-30
-1-