N1030B Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – HEXSEALS:Silicone rubber conforms to A-A-59588 Class 3B, GR 50 unless otherwise specified.

SPECIFICATIONS
Material: HEXSEALS:Silicone rubber conforms to A-A-59588 Class 3B,
GR 50 unless otherwise specified.
Mounting Nut: HEXSEALS: Brass, nickel-plated (unless otherwise
noted)
Temperature Range: HEXSEALS: -94°F to +400°F
Pressure Range: Exceeds 15 psi internal and 1500 psi external.
Operational Life: 50,000 actuations (minimum).
Shelf Life: Excess of 25 years.
Resistant to: Salt spray, sunlight, ozone, weather, fungus, and most
acids and lubricating oils
Agency Recognition: E-SEELS and HEXSEALS are UL-listed to UL
Std. 50 types 1-13, and meet CSA standards.
Installation: If a reducing adaptor is required - see page 14 of
HEXSEAL catalog HEX200 for part numbers and drawing.
F HOLE DIMENSION WAS CORRECTED from 0.078" to 0.109" PER MS SPEC.
E CAD COMPUTER GENERATED
D REDRAWN
REV.
DESCRIPTION
MAXIMUM AND MINIMUM MEASURE-
MENTS ARE STATED DIRECTLY ON
EACH DIMENSION.
MAT'L: Silicone Rubber
BOOT TOGGLE SWITCH ^ENG.
EXPOSED BAT (N-1030B)
DWN.
CHKD.
A-A-59588, Gr.50
FINISH: GRAY
SCALE
APM-HEXSEAL CORPORATION _{4 : 1}
S. GOK
03.04.09
09.23.02
10.11.74
DATE
M.M. 06.06.61
(N-1030B)
HEXSEAL 
THIS DRAWING COVERS PROPRIETARY ITEM AND IS THE PROPERTY OF THE APM-HEXSEAL CORPORATION.
THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE WRITTEN APPROVAL OF AN OFFICER OF THE APM-HEXSEAL CORPORATION.