MS-156C Datasheet, PDF (1/10 Pages) List of Unclassifed Manufacturers – Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz

NEW
Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
MS-156C Series
Halogen Free
sOverview
Developed for inspection of high frequency
circuits used in portable terminals.Verification of
the circuit performance is accomplished by simply
inserting the external plug in the board mounted
receptacle.This action re-directs the circuit from
normal condition to the plug side. Removing the
plug restores circuit to its normal condition.
Space-saving design
Low profile -1.35 mm protrusion above the board.
Lightweight -0.014 g. total weight.
sFeatures
1. Low insertion loss
0.15 dB typical at 2.5 GHz (not mated with the plug).
0.2 dB typical at 6 GHz (not mated with the plug).
0.4 dB typical at 11 GHz (not mated with the plug).
2. Space-saving design
2.3 mm x 2.3 mm occupied board space.
3. Low profile
1.35 mm protrusion above the board.
4. Lightweight
0.014 g. total weight
5. Durability
100 mating/unmating cycles, with corresponding plug.
6. Performs over a wide frequency range
Applicable frequencies range over a wide band,
from DC to 11 GHz.
7. Board placement with automatic equipment
Packaged on tape-and-reel. Also available with a
vacuum pick-up cap over each switch.
8. Halogen Free
Chlorine, and bromine are not used in the receptacles.
*Definition according to IEC 61249-2-21.
Br 900 ppm max., Cl 900 ppm max., and Br + Cl 1500
ppm max.
MS-156C
Comparison with the existing MS-156HF
MS-156HF
qFootprint
2.7
MS-156C
2.3
qHeight
27% saving of space
qWeight
15% lower profile
0.025g
0.014g
44% lighter weight
2010.11
1