MPQ-ARM Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – The MPQ-ARM is a member of RPM’s family of dedicated in-system device programmers.

RPMSystems
Corporation
Redmond, Washington USA
MPQ-ARM
Four Port
In-Circuit Programmer
for
ARM Microcontrollers
January, 2012
The MPQ-ARM is a member of RPM’s family of
dedicated in-system device programmers. It supports in-
circuit programming of ARM Cortex microcontrollers.
Like all MPQ’s, it is reliable, efficient, flexible and cost
effective - all of the features you require in a manufacturing
programmer.
Fast and Portable
Up to four different target images can be stored in the
programmer’s internal Flash memory, allowing faster
programming times and standalone operation. Our adaptive
programming algorithm provides the fastest programming
time for each image.
Program 4 to 64 Devices Simultaneously
Four-port programming allows each MPQ to program the
same image on up to four separate target devices simulta-
neously, increasing manufacturing throughput fourfold. Up
to 16 MPQ’s can be interconnected in an array to allow
programming of up to 64 devices simultaneously.
Stand-alone, ATE-Controlled or PC-Controlled
MPQ can be operated stand-alone (just press a button to
initiate programming), directly from a host PC using
MPManager software, or under the control of your Auto-
mated Test Equipment (ATE) system.
Supports SWD Programming
MPQ-ARM provides in-circuit SWD programming, to
accommodate the widest range of ARM Cortex devices
and customer programming requirements.
Rugged and Ready for Manufacturing World Wide
Features like an extruded aluminum chassis, universal
power supply and extensive electrical protection ensure
that MPQ-AVR will be at home in any manufacturing
environment.
Secure Image Management
Secure your programming images, preventing them from
being read back from the programmer, and define a
maximum number of parts to be programmed from each
image. Send your MPQ to CM’s anywhere in the world
without worry.
Powerful Software - Field Upgradable
MPQ-ARM comes complete with MPManager soft-
ware to provide programmer configuration and image
management, PC-controlled device programming, and
more. MPManager also provides the ability to upgrade
your MPQ-ARM programmer on site as support for
new devices is released by RPM.
Device Serialization
MPQ-ARM supports on-the-fly image modification,
allowing each device to be programmed with a unique
serial number, MAC address, IP address, etc.
RPM Systems Corporation Suite A-5 17371 Northeast 67th Court Redmond, Washington 98052, USA
Ph: [phone] Web: http://www.rpmsys.com/mpq.html E-mail: [e-mail]