MP1L00501035ST Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Contactless Linear Sensor - IP64 Debris Proof, Splash Proof

Features
- Contactless Linear Sensor
- IP64 Debris Proof, Splash Proof
- Ideal for Hydraulic and Pneumatic Position
Sensing
- Liquid Level Capability
- Upon request
- Male or Female Nicomatic Connectors
- Corresponding Exterior Magnet
Mechanical Specifications
-Life Cycle: >1 million
-Height: 3.50mm (0.138")
-Actuation Force: 0.09 to 0.11 lbs pull force at
desired distance (pull force rating is for the
exterior magnet using a test plate of cold rolled
steel).
Environmental Specifications
-Operating Temperature: up to +85°C
-IP Rating of Active Area: IP64
Electrical Specifications
-Resistance - Standard: 10k Ohms
(lengths >300mm = 20k Ohms)
-Resistance - Custom: 5k to 500k Ohms
-Resistance Tolerance: ±20%
-Effective Electrical Travel: 8 to 1200mm
-Resolution: Depends on the exterior magnet
strength and distance to the MagnetoPot
-Power Rating: 0.50 Watt continuous, 1 Watt Peak
-Dielectric Value: No affect @ 500VAC for 1
minute
-Independant Linearity: ±5% (±1% available)
-Hysteresis: 3mm*
*Please note that the hysteresis is directly affected
by the drive magnet size, strength, and distance
from the internal magnet.
Dimensional Diagram - Stock Linear MagnetoPots
PART LENGTH [P]
ACTIVE LENGTH [A]
10.16 [0.400]
TAIL WIDTH
PIN 1
20.32 [0.800]
3.81 [0.150]
ACTIVE WIDTH
8.24 [0.325]
7.93 [0.312]
TAIL LENGTH [T]
A
12.50mm
0.492"
25.00mm
0.984"
50.00mm 100.00mm 150.00mm 171.89mm 200.00mm 300.00mm 400.00mm 500.00mm 750.00mm 1000.00mm
1.969"
3.937"
5.906"
6.768"
7.874" 11.811" 15.748" 19.685" 29.528" 39.370"
P
28.36mm
1.117"
40.86mm
1.609"
T
12.70mm
0.500"
65.86mm
2.593"
115.86mm
4.562"
165.86mm
6.531"
185.86mm
7.318"
215.86mm 315.86mm
8.499"
12.436"
24.89mm
0.980"
415.86mm
16.373"
515.86mm
20.310"
765.86mm 1015.86mm
30.153"
39.995"
spectrasymbol.com
Rev G1 - Page 1
[phone]