MP1001000G-01 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – MatchPort b/g Embedded Device Server

MatchPort b/g Embedded Device Server
Extremely affordable embedded 802.11 b/g wireless networking
Common platform form factor for a family of wired and wireless modules
Bulletproof security with IEEE 802.11i-PSK, WPA-PSK, TKIP and
optional 256-bit AES end-to-end encryption
Full TCP/IP stack, web server and Windows deployment software
Up to 230 Kbps data rate
FCC Class B, UL and EN EMC and safety-compliant
Compact: 45mm x 45mm with 40-pin 2 mm header
The Ultimate in Flexibility, Security, Performance and
Affordability in Embedded Wireless Networking
MatchPort^™ b/g enables you to build wireless
networking into virtually any electronic device
with a serial interface. With this full-featured,
turnkey embedded device server module your
products can be wirelessly accessed and
controlled over the Internet!
Pin-compatible Wireless/Wired Module Family
MatchPort b/g is the first in a family of pin and form-factor
compatible wireless and wired module solutions. The MatchPort
family enables you to “future proof” your designs with a choice
of flexible media-independent 802.11 b/g or Ethernet networking
products. It takes the complexity out of RF design and embedded
Ethernet networking, enabling you to focus on your products.
And it minimizes engineering risk, reduces cost and shortens
development time.
Complete Wireless Network Processing Module
MatchPort b/g is a dedicated co-processor module that
manages wireless and network activity, permitting the device’s
host microprocessor to function at maximum efficiency. Using
a dual processor design (one for converting wired serial data
into TCP/IP packets and providing web server capabilities, the
other an 802.11 b/g baseband and radio chipset) MatchPort
b/g enables 802.11 wireless connectivity and web services on
any device with a serial interface on its host microcontroller.
Powered by a Lantronix DSTni^™ x86 class processor SoC with
256 KB of on-chip SRAM, MatchPort b/g also includes 2MB
of Flash memory for web page storage and firmware.
Bulletproof Security
With IEEE 802.11i-PSK (AES-CCMP) or WPA-PSK (TKIP) security,
MatchPort b/g offers the highest levels of wireless encryption.
It also optionally supports 256-bit Advanced Encryption
Standards (Rijndael) encryption for true end-to-end (along the
wired/wireless path) secure data transfer.
Robust, Feature-Rich Software Suite
Eliminating the need to negotiate the intricacies of Transmission
Control Protocol (TCP) or Internet Protocol (IP), MatchPort b/g
incorporates:
• Robust operating system
• Full-featured network protocol stack and radio system driver
• Proven, ready-to-use serial-to-wireless application
• Built-in web server for device communication and
configuration via a standard browser
• Windows-based DeviceInstaller^™ – making configuring
one or more units in a subnet quick and easy
FCC Certified for Immediate Deployment
MatchPort b/g is module certified by the U.S. Federal
Communications Commission (FCC). This allows you to
leverage the Lantronix FCC license grant and bypass 802.11
regulatory testing, speeding time-to-market and minimizing
development and testing costs. MatchPort b/g is also pre-
tested for European telecommunications regulations.
Flexible, Efficient Design
Designed without an attached antenna, MatchPort b/g provides
the flexibility to design and place the antenna and antenna
connector based on your design requirements. MatchPort b/g
includes a user controlled intelligent power management
option to shut the radio off during periods of inactivity
minimizing unnecessary current consumption.
Scan, Gather and Report Radio Parameters
With its Scan command, MatchPort b/g enables the ability to
report BSSID, RSSI and SSID. The Network Status command
reports BSSID, authentication and negotiated encryption
types for the current association.