|
ML610Q435 Datasheet, PDF (1/35 Pages) List of Unclassifed Manufacturers – 8-bit Microcontroller with a Built-in LCD driver | |||
|
ML610Q435/ML610Q436
8-bit Microcontroller with a Built-in LCD driver
FEDL610Q435-02
Issue Date: Feb.2, 2011
GENERAL DESCRIPTION
This LSI is a high-performance 8-bit CMOS microcontroller into which rich peripheral circuits, such as real-time clock,
synchronous serial port, UART, I2C bus interface (master), melody driver, battery level detect circuit, RC oscillation type A/D
converter, 12-bit successive approximation type A/D converter, and LCD driver, are incorporated around 8-bit CPU nX-U8/100.
The CPU nX-U8/100 is capable of efficient instruction execution in 1-intruction 1-clock mode by 3-stage pipe line architecture
parallel procesing. The Flash ROM that is installed as program memory achieves low-voltage low-power consumption operation
(read operation) equivalent to mask ROM and is most suitable for battery-driven applications.
The on-chip debug function that is installed enables program debugging and programming.
FEATURES
ï· CPU
ï 8-bit RISC CPU (CPU name: nX-U8/100)
ï Instruction system: 16-bit instructions
ï Instruction set: Transfer, arithmetic operations, comparison, logic operations, multiplication/division, bit
manipulations, bit logic operations, jump, conditional jump, call return stack manipulations, arithmetic
shift, and so on
ï On-Chip debug function
ï Minimum instruction execution time
30.5 ïs (@32.768 kHz system clock)
0.24 4ïs (@4.096 MHz system clock)
ï· Internal memory
ï Internal 96KBbyte Flash ROM (48Kï´16 bits) (including unusable 1KByte TEST area)
ï Internal 2KByte Data RAM (2048ï´8 bits), 1KByte Display Allocation RAM (1024 x 8bit)
ï Internal 192Byte RAM for display
ï· Interrupt controller
ï 2 non-maskable interrupt sources (Internal source: 1, External source: 1)
ï 23 maskable interrupt sources (Internal sources: 19, External sources: 4)
ï· Time base counter
ï Low-speed time base counter ï´1 channel
Frequency compensation (Compensation range: Approx. ï488ppm to +488ppm. Compensation accuracy: Approx.
0.48ppm)
ï High-speed time base counter ï´1 channel
ï· Watchdog timer
ï Non-maskable interrupt and reset
ï Free running
ï Overflow period: 4 types selectable (125ms, 500ms, 2s, and 8s)
ï· Timers
ï 8 bits ï´ 4 channels (16-bit configuration available)
ï· 1 kHz timer
ï 10 Hz/1 Hz interrupt function
1/35
|
▷ |