|
ML610Q409A Datasheet, PDF (1/34 Pages) List of Unclassifed Manufacturers – 8-bit Microcontroller with a Built-in LCD driver | |||
|
ML610Q407/ML610Q408/ML61Q0409
8-bit Microcontroller with a Built-in LCD driver
FEDL610Q409-05
Issue Date: May.23, 2014
GENERAL DESCRIPTION
ML610Q407/ML610Q408/ML610Q409 is a high-performance 8-bit CMOS microcontroller into which peripheral circuits, such
as synchronous serial port, UART, melody driver, RC oscillation type A/D converter, and LCD driver, are incorporated around
LAPIS Semiconductor-original 8-bit CPU nX-U8/100. ML610Q407/ML610Q408/ML610Q409 operates in both high/low-speed
mode and power-saving mode, it is most suitable for battery operated products.
The short TAT are entertained by offering MTP version ML610Q407(P)/ML610Q408(P)/ML610Q409(P).
ML610Q407P/ ML610Q408P/ML610Q409P support industrial temperature -40°C to +85°C, are added to the product lineup.
FEATURES
⢠CPU
â 8-bit RISC CPU (CPU name: nX-U8/100)
â Instruction system: 16-bit instructions
â Instruction set: Transfer, arithmetic operations, comparison, logic operations, multiplication/division, bit
manipulations, bit logic operations, jump, conditional jump, call return stack manipulations, arithmetic
shift, and so on
â On-Chip debug function (MTP version only)
â Minimum instruction execution time
30.5 µs (@32.768 kHz system clock)
2µs (@500kHz system clock)
0.5µs(@2MHz system clock)
⢠Internal memory
â Internal 16KByte Flash ROM (8KÃ16 bits) (including unusable ï¼K Byte TEST area)
â Internal 1KByte Data RAM (1024Ã8 bits)
⢠Interrupt controller
â 1 non-maskable interrupt sources
Internal source: 1 (Watch dog timer)
â 27 maskable interrupt sources
Internal sources: 14 (SSIO0, SSIO1, Timer0, Timer1, Timer2, Timer3, UARTï¼, Melody0, RC-A/D converter, PWM0,
TBC128Hz, TBC32Hz, TBC16Hz, TBC2Hz)
External sources: 13 (P00, P01, P02, P03, P04, P50, P51, P52, P53, P54, P55, P56, P57)
(One interrupt request is generated from P50 to P57 interrupt sources.)
⢠Time base counter
â Low-speed time base counter Ã1 channel
Frequency compensation (Compensation range: Approx. â488ppm to +488ppm. Compensation accuracy: Approx.
0.48ppm)
â High-speed time base counter Ã1 channel
⢠Watchdog timer
â Non-maskable interrupt and reset
â Free running
â Overflow period: 4 types selectable (125ms, 500ms, 2s, and 8s)
⢠Timers
â 8 bits à 4 channels (Timer0-3: 16-bit x 2 configuration available by using Timer0-1 or Timer2-3)
â Clock frequency measurement mode (in one channel of 16-bit configuration using Timer2-3)
1/34
|
▷ |