ML610Q101 Datasheet, PDF (1/23 Pages) List of Unclassifed Manufacturers – 8-bit Microcontroller

ML610Q101/ML610Q102
8-bit Microcontroller
FEDL610Q101-03
Issue Date: Aug. 4, 2015
GENERAL DESCRIPTION
This LSI is a high-performance 8-bit CMOS microcontroller into which rich peripheral circuits, such as timers,
PWM, UART, voltage level supervisor (VLS) function, and 10-bit successive approximation type A/D converter,
are incorporated around 8-bit CPU nX-U8/100.
The CPU nX-U8/100 is capable of efficient instruction execution in 1-intruction 1-clock mode by pipe line
architecture parallel processing.
The on-chip debug function that is installed enables program debugging and programming.
FEATURES
• CPU
− 8-bit RISC CPU (CPU name: nX-U8/100)
− Instruction system: 16-bit instructions
− Instruction set:
Transfer, arithmetic operations, comparison, logic operations, multiplication/division, bit manipulations, bit
logic operations, jump, conditional jump, call return stack manipulations, arithmetic shift, and so on
− On-Chip debug function
− Minimum instruction execution time
30.5µs (@32.768kHz system clock)
0.122µs (@8.192MHz system clock)
• Internal memory
− ML610Q101 : Internal 4Kbyte Flash ROM (2K×16 bits) (including unusable 32 byte test data area)
− ML610Q102 : Internal 6Kbyte Flash ROM (3K×16 bits) (including unusable 32 byte test data area)
− Internal 256byte data RAM (256×8 bits)
• Interrupt controller
− 1 non-maskable interrupt source (Internal source: 1)
− 21 maskable interrupt sources (Internal sources: 16, External sources: 5)
• Time base counter (TBC)
− Low-speed time base counter ×1 channel
− High-speed time base counter ×1 channel
• Watchdog timer (WDT)
− Non-maskable interrupt and reset
− Free running
− Overflow period: 4 types selectable (125ms, 500ms, 2s, and 8s)
• Timer
− 8 bits × 6 channels (16-bit configuration available)
− Support Continuos timer mode/one shot timer mode
− Timer start/stop function by software or external trigger input
1/23