|
MKS4G032205BSOKSSD Datasheet, PDF (1/11 Pages) List of Unclassifed Manufacturers – Metallized Polyester (PET) Capacitors PCM 7.5 mm to 37.5 mm | |||
|
D
WIMA MKS 4
Metallized Polyester (PET) Capacitors
PCM 7.5 mm to 37.5 mm
Special Features
Electrical Data
Ë High volume/capacitance ratio
Ë Self-healing
Ë According to RoHS 2002/95/EC
Typical Applications
For general DC-applications e.g.
Ë By-pass
Ë Blocking
Ë Coupling and decoupling
Ë Timing
Construction
Dielectric:
Polyethylene-terephthalate (PET) film
Capacitor electrodes:
Vacuum-deposited
Internal construction:
MKS 4: 30 VAC, 40 VAC, 63 VAC, 160 VAC, 200 VAC
Plastic film
Vacuum-deposited
electrode
Metal contact layer
(schoopage)
Terminating wire
MKS 4: 400 VAC
Plastic film
Vacuum-deposited
electrode
Metal contact layer
(schoopage)
Terminating wire
Encapsulation:
Solvent-resistant, flame-retardant plastic
case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire.
Marking:
Colour: Red. Marking: Black.
Epoxy resin seal: Red
Capacitance range:
1000 pF to 220 mF (E12-values on request)
Rated voltages:
50 VDC, 63 VDC, 100 VDC, 250 VDC, 400 VDC,
630 VDC, 1000 VDC, 1500 VDC, 2000 VDC
Capacitance tolerances:
屉20%, 屉10% 屉5%
Operating temperature range:
â55+ C to +100+ C
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance at +20+ C:
Test voltage: 1.6 Ur, 2 sec.
Test specifications:
In accordance with IEC 60384-2
and EN 130â400
Voltage derating:
A voltage derating factor of 1.25 % per K
must be applied from +85+ C for DC
voltages and from +75+ C for AC
voltages.
Reliability:
Operational life ï 300â000 hours
Failure rate ï 2 fit (0.5 x Ur and 40) C)
Ur Utest
C ï 0.33 mF
0.33 mF < C T 220 mF
â 50 VDC â 10âV ï5 x 103 M¸ (mean value: 3 x 104 M¸) ï1500 sec (M¸ x mF) (mean value: 4500 sec)
â 63 VDC â 50âV ï1 x 104 M¸ (mean value: 5 x 104 M¸) ï3000 sec (M¸ x mF) (mean value: 6000 sec)
100 VDC 100âV ï1.5 x 104 M¸ (mean value: 5 x 104 M¸) ï5000 sec (M¸ x mF) (mean value: 15000 sec)
U250 VDC 100âV ï3 x 104 M¸ (mean value: 1 x 105 M¸) ï10â000 sec (M¸ x mF) (mean value: 40â000 sec)
Measuring time: 1 min.
Dissipation factors at + 20) C: tan d
at f
C ï 0.1 mF
0.1 mF < C T 1.0 mF
C > 1.0 mF
ââ 1 kHz
â 10 kHz
100 kHz
ï â 8 x 10-3
ï 15 x 10-3
ï 30 x 10-3
ï â 8 x 10-3
ï 15 x 10-3
â
ï 10 x 10-3
â
â
Maximum pulse rise time:
Capacitance
pF/mF
Pulse rise time V/msec
max. operation/test
50VDC 63VDC 100VDC 250VDC 400VDC 630VDC 1000VDC 1500VDC 2000VDC
1000â ... 6800â â
â
â
â
â
â 70/700 90/900 100/1000
0.01â ... 0.022 â 30/300 30/300 35/350 38/380 40/400 50/500 50/500 â 60/600â
0.033 ... 0.068 â 15/150 15/150 20/200 25/250 32/320 26/260 35/350 â 40/400â
0.1ââ ... 0.22â 10/100 10/100 12/120 15/150 15/150 17/170 20/200 35/350 â 40/400â
0.33â ... 0.68â 9/90 9/90 9/90 10/100 10/100 13/130 20/200 20/200 â 38/380â
1.0ââ ... 2.2ââ 6/60 6/60 5/50 6/60 9/90 13/130 14/140 15/150 â
3.3ââ ... 6.8ââ 2.5/25 3/30 3/30 6/60 6/60 9/90 12/120 â
â
10âââ ... 220ââ 2.5/25 2.5/25 2.5/25 3/30 6/60 â
â
â
â
for pulses equal to the rated voltage
Mechanical Tests
Packing
Pull test on leads:
d T 0.8 l: 10 N in direction of leads
d > 0.8 l: 20 N in direction of leads
according to IEC 60068-2-21
Vibration:
6 hours at 10â...â2000 Hz and 0.75 mm
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test: 4000 bumps at 390 m/sec2
in accordance with IEC 60068-2-29
Available taped and reeled up to and
including case size 15 x 26 x 31.5 /
PCM 27.5 mm.
Detailed taping information and graphs
at the end of the catalogue.
For further details and graphs please
refer to Technical Information.
45
|
▷ |