MKP-X2 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Metallized Polypropylene RFI-Capacitors Class X2 PCM 7.5 mm to 27.5 mm

D
WIMA MKP-X2
Metallized Polypropylene (PP)
RFI-Capacitors Class X2
PCM 7.5 mm to 27.5 mm
Special Features
˜ Reliable self-healing
˜ High degree of interference
suppression due to good
attenuation and low ESR
˜ According to RoHS 2002/95/EC
Typical Applications
Class X2 RFI applications to meet
EMC regulations
˜ Capacitors connected to the mains
between phase and neutral or
phase conductors
˜ Installation category II in
accordance with IEC 60664,
pulse peak voltage ! 2.5 kV
Construction
Dielectric:
Polypropylene (PP) film
Capacitor electrodes:
Vacuum-deposited
Internal construction:
Plastic film
Vacuum-deposited
electrode
Metal contact layer
(schoopage)
Terminating wire
Encapsulation:
Solvent-resistant, flame-retardent plastic
case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire.
Marking:
Colour: Red. Marking: Black.
Electrical Data
Capacitance range:
1000 pF to 2.2 mF
Rated voltages:
275 VAC
Capacitance tolerances:
±20%, ±10%
Operating temperature range:
–55) C to +105) C
Climatic test category:
55/105/56/B in accordance with IEC
Insulation resistance at +20+ C:
C ! 0.33 mF: & 15 x 10³ M¸
C > 0.33 mF: & 5000 sec (M¸ x mF)
Measuring voltage: 100 V/1 min.
Dissipation factors at + 20) C: tan d
at f
C ! 0.1 mF
Test specifications:
In accordance with DIN EN 132 400
Maximum pulse rise time:
100 V/msec at U_pp = 390 V
Test voltage:
C ! 1.0 mF: 2200 VDC, 2 sec.
C > 1.0 mF: 1800 VDC, 2 sec.
Reliability:
Operational life > 300 000 hours
Failure rate < 2 fit (0.5 x U_r and 40) C)
0.1 mF < C ! 1.0 mF
C > 1.0 mF
1 kHz
10 kHz
100 kHz
! 10 x 10^-4
! 20 x 10^-4
! 90 x 10^-4
! 20 x 10^-4
! 60 x 10^-4
–
! 30 x 10^-4
–
–
Approvals:
Country Authority
Specification
Symbol
Approval-No.
Germany
VDE
DIN EN 132 400
IEC 60384-14/2
40003472
USA/Canada UL
UL 1414 (250 VAC)
C 22.2 No. 1 (250 VAC)
E 134915
USA/Canada UL
UL 1283 (305 VAC)
C 22.2 No. 8 (305 VAC)
E 100438
Mechanical Tests
Pull test on leads:
10 N in direction of leads
according to IEC 60068-2-21
Vibration:
6 hours at 10 ... 2000 Hz and 0.75 mm
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test:
4000 bumpst at 390 m/sec² in
accordance with IEC 60068-2-29
Packing
Available taped and reeled up to and
including case size 15 x 26 x 31.5 /
PCM 27.5 mm.
Detailed taping information and graphs
at the end of the catalogue.
For further details and graphs please
refer to Technical Information.
89