MHP201R0F Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 20W TO220 High Power Resistors

20W TO220
High Power Resistors
MHP 20
· Non-inductive.
· Thermally enhanced Industry standard TO220 package.
· RoHS compliant.
· Low thermal resistance, 5.9 °C/W resistor hot spot to metal tab.
· Complete thermal flow design available for easy implementation.
· Superior vibration durability.
· Small thin package for high density PCB installation.
Applications
· High frequency circuits and high speed pulse designs.
· Switch mode power supplies.
· Motor control and drive circuits.
· Automotive.
· Industrial computing and measurement systems.
Specifications
Items
Power Rating
Power Rating
Thermal Resistance
Resistance Range
Nominal Resistance Series
TCR
Tolerance
Operation Temp. Range
Max. Operating Volt.
Dielectric Withstanding Volt-
age
Load Life
Humidity
Temp. Cycle
Soldering Heat
Solder ability
Insulation Resistance
Vibration
0.01-0.09 Ω
E6
250 ppm/°C
+/- 5% (J)
Specification
20 Watts
1.0 Watts
5.9 °C/W
0.1-9.1 Ω
E24
100 ppm/°C
5% (J)
-55°C to+155°C
500V or √ P.R
10-220 Ω
E24
50 ppm/°C
+/-1% (F)
2000 Volts AC
ΔR +/-(1.0 %+0.05 Ω)
ΔR +/- (1.0 %+0.05 Ω)
ΔR +/- (0.25 %+0.05 Ω)
ΔR +/- (0.1 %+0.05 Ω)
Over 95% of surface
Over 1,000 MΩ
ΔR +/- (0.25 %+0.05 Ω)
Conditions
-55 to 25 °C flange temperature
Free air.
Hot spot to Tab
Up to 51 KΩ also available
2.5 Ω and 5.0 Ω also available
-55 to +155 °C
60 seconds.
25 °C, 90 min. ON, 30 min. OFF, 1000 hours.
40°C, 90-95% RH, DC 0.1 W, 1000 hours.
-55 °C,30 min.,+155 °C,30 min., 5 cycles
250+/-5 °C, 3 seconds,
230+/-5 °C, 3 seconds.
Between terminals and tab.
General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
© TT electronics plc
www.bitechnologies.com www.irctt.com www.welwyn-tt.com
04.12