MGDI-10 Datasheet, PDF (1/12 Pages) List of Unclassifed Manufacturers – Industrial DC/DC CONVERTER

Industrial DC/DC CONVERTER
MGDI-10 Standard Input : 10W POWER ^Industrial
Grade
2:1 Standard Input
Single & Bi Outputs
Metallic case - 1.500 VDC Isolation
• _{Low profile : 0,33 “ ( 8.5mm)}
• Nominal power of 10 W without derating
• Wide temperature range : -40°C/+95°C case
• High efficiency up to 83 %
• Soft start
• Galvanic isolation 1.500 VDC
• Integrated LC EMI filter
• Permanent short circuit protection
• No optocoupler for high reliability
1-General
The MGDI-10 series is a full family of DC/DC All the modules are designed with LC network
power modules designed for use in distributed filters to minimize reflected input current ripple
power architecture and are particularly suitable and output voltage ripple according to EN55022
for mobile or ground fixed applications in and FCC Part 15J standard.
transportation, industry and télécommunication The modules include a soft-start, an input
areas. These modules use a high frequency fixed undervoltage lock-out, a permanent short cir-
switching technic at 480 KHz providing excellent cuit protection and an output overvoltage pro-
reliability, low noise characteristics, high power tection to ensure efficient module protections.
density and a low profile package. Standard The soft-start allows current limitation and
models are available with nominal input volta- eliminates inrush current during start-up. The
ges as 5, 12, or 24 volts in range of 4,5-5,5 or
18-36 volts. The series include single and bi
short circuit protection completely protects the
modules against short-circuits of any duration
5
output voltage choices of 3,3, 5, 12, 15, +/-5, by a shut-down and restores to normal when
+/-12 or +/-15 volts.
the overload is removed.
No external heatsink is required for the MGDI- The design has been carried out with surface
10 series to supply 10W output power over the mount components and is manufactured in a
case temperature range of -40°C up to 95°C. fully automated process to guarantee high
The MGDI-10 series is designed in conformity quality. Each module is tested and burned in
with safety standards EN60950 and UL1950.
with a GAIA Converter automated test
equipment.
2-Product Selection
Single output model : MGDSI-10-
Bi output model
: MGDBI-10-
Input Voltage Range
Permanent
C : 4,5-5,5 VDC
I : 18-36 VDC
Output
B : 3.3 VDC
C : 5 VDC or +/-5VDC
E : 12 VDC or +/-12VDC
F : 15 VDC or +/-15VDC
REDEFINING THE SOURCE OF POWER
© Gaia Converter FC97-006.03/06 Revision M
For locations, phone, fax, E-Mail see back cover