MCNDI-02S Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – DIL Switches

MCNDI Series
DIL Switches
NDI
Features:
• Single pole single throw DIL switches.
• Splay terminals allow for automatic insertion by IC insertion machine.
• Insert moulding of terminals and ultrasonic welding improve flux proofness and enable
flux washing in whole by top tape sealing.
• NDI series (raised actuator) available for different purposes.
• Double contacts offers high reliability.
• Vapour phase solderable, IR-reflow solderable.
• Terminal plating by gold give excellent results when soldering.
Terminal plating
: Tin/lead available too.
Lead Spacing
: 7.62 x 2.54.
Materials:
Base and cover
: High temperature thermoplastic.
Colour : Black.
Actuator
: Nylon thermoplastic.
Colour : White.
Contact
: Alloy copper.
Contact plating
: Gold plated over nickel.
Terminal plating
: Gold. (or Tin/Lead available).
Tape plating
: Kapton.
Life expectancy
: 2000ops.
It is recommended to solder switches in the ’off’ factory supplied position.
Specifications:
Mechanical:
Mechanical life
: 2000 operations per switch.
Operation force
: 1000gf maximum.
Operating temperature : -20°C to +85°C.
Storage temperature
: -40°C to +85°C.
Vibration test
: MIL-STD-202F Method 201A.
Frequency : 10 - 55 - 10Hz/1 minute.
Directions : X, Y, Z three mutually perpendicular directions.
Time
: 2 hours each direction.
High reliability.
Shock test
: MIL-STD-202F Method 213B.
Condition A.
Gravity
: 50G (peak value), 11 milliseconds.
Direction and times : 6 sides and 3 times in each direction.
High reliability.
Page 1
08/05/06 V1.0