MC000999 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – USB C to USB 3.1 A Plug Cable

USB C to USB 3.1 A Plug Cable
Dimensions : Millimetres
Note:
No. Name
Material Description
Qty Unit
1. Open/Short/Intermittence 100% test.
2. Hi-Pot : 300V DC/0.02 Sec.
USB 3.1 UL2725 (30AWG×1P+EAM)×2+
1. Cable (32AWG×1P+AM)+24AWG×2C+2E+AEB A/R mm
3. Insulation Resistance : 300V DC/0.02 Sec,
+PVC Jacket OD : 4.5mm Black
10MΩ Min.
4. Conductive Resistance : 3Ω Max.
2.
Conn.
USB C Type Plug Terminal 30μ’, Black,
Stamping Shell
1
Set
5. Pin A5 (CC) of the USB Type-C plug shall be
connected to VBUS through a resistor
3.
Conn.
USB A Type Plug Contact Gold Plated 1 Set
Rp Rp = 56kΩ ±20%
6. A 10nF bypass capacitor is required
4.
Outer
Molded
70P PVC Black
A/R kg
between the VBUS and ground pins in the
USB Type-C plug side of the cable.
7. Voltage : 5V, Current : 3A
Part Number Table
Description
Part Number
USB Cable, 3.1 Type A Plug-Type C Plug MC000999
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
www.element14.com
www.farnell.com
www.newark.com
Page <1>
16/12/15 V1.0