MB1G Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Multipurpose Boxes

Multipurpose Boxes
Features:
• These boxes are moulded in ABS to give maximum strength but can be
easily punched or drilled for individual requirements and to produce a
professional looking end product
• Printed circuit board slots are provided on certain types to allow ease of
manufacture
• The lids are retain by M3.5 countersunk screws into brass inserts
Specification Table
Description
A
79
Box, ABS, Grey
100
118
Overall Dimensions
Nominal
Rib Spacing
Part Number
B
C
Wall
Thickness ^{Side A}
Side B
61
40
20
20
76
41
1.5
MB1G
MB2G
98
45
23
23
MB3G
Dimensions : Millimetres
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
www.element14.com
www.farnell.com
www.newark.com
Page <1>
12/05/12 V1.1