MB-8 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – MicroAmp MB-8 Circuit Board

MicroAmp MB-8 Circuit Board
For Mini-Circuits LTCC Filters
FEATURES
• Fits Mini-Circuits LFCN, HFCN,
and BFCN filters in FV1206 package
• Lowpass, highpass, bandpass filters
• Many filters to choose from
• RO-4350 board material
• Fits MicroAmp MH-series housings
The MicroAmp MB-8 circuit board is designed for rapid prototyping of microwave filters using the Mini-Circuits line of LFCN, HFCN,
and BFCN components in the FV1206 package. Filters from under 100 MHz to over 6 GHz can be quickly fabricated in lowpass,
highpass, or bandpass configurations. In addition, the MB-8 can be used to insert a series element with a standard 1206 surface
mount package such as a DC blocking capacitor or series resistor. This board will fit the MicroAmp MH series of connectorized
housings that allow it to be used as a single passive network or cascaded with other MicroAmp boards for added versatility. Boards
are fabricated from a high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating (electroless
nickel/immersion gold) on both the component side and the solid bottom ground plane. The board measures 0.490" x 0.590" and
mounts into the housing with four or eight #1-72 screws. Mounting screws closer to the traces allow for better grounding with higher
frequency filters. Pads for the RF connectors allow the SMA center pins to be easily soldered to the board after it is installed into the
housing.
REF SIZE
FUNCTION
FIL1 FV1206/1206 Filter or passive
J1
Input
J2
Output
FILTER SCHEMATIC
ASSEMBLY
For additional product information, please visit www.twinind.com
Contact information: 925-866-8946 (phone) 925-866-8937 (fax) [e-mail]