English
Language : 

MB-11 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – MicroAmp MB-11 Circuit Board
MicroAmp MB-11 Circuit Board
For Hittite SOT-23 Prescalers
FEATURES
• Fits Hittite 6-pin SOT-23 prescaler packages
• Divide by 2/4/8 configurations
• Input frequencies up to 8 GHz
• DC blocks on input and output
• RO-4350 board material
• Fits MicroAmp MH-series housings
The MicroAmp MB-11 circuit board is designed for rapid prototyping of Hittite Microwave 6-pin SOT-23 prescalers. HMC-43X prescal-
ers are available in divide by 2/4/8 versions (HMC-432/433/434) which operate at input frequencies as high as 8 GHz. This board will
fit the MicroAmp MH series of connectorized housings that allow it to be used as a single prescaler or cascaded with other MicroAmp
boards for added versatility. Boards are fabricated from a high-performance 13 mil thick RO-4350 laminate with RoHS compatible
ENIG plating (electroless nickel/immersion gold) on both the component side and the solid bottom ground plane. The board
measures 0.490" x 0.590" and mounts into the housing with four or six #1-72 screws to insure optimal grounding for high frequency
operation. Prescaler circuits can be easily assembled with standard surface-mount passive components. It includes provisions for
input and output DC blocking capacitors and bias bypass capacitors. Pads for the RF input/output connectors allow the SMA center
pins to be easily soldered to the board after it is installed into the housing, as well as a large pad to connect the bias voltage to the
feed-through. These prescalers have a tendency to output broadband noise or oscillations when not driven with sufficient input
power. Consult the Hittite data sheets for proper drive levels.
REF SIZE
C1 0402
C2 0402
C3 0603
C4 0603/0805
U1 SOT-23
J1
J2
J3
FUNCTION
DC block
DC block
Bypass
Bypass
Prescaler
Signal input (pin 3)
Signal output (pin 6)
Bias (pin 5)
PRESCALER SCHEMATIC
ASSEMBLY
For additional product information, please visit www.twinind.com
Contact information: 925-866-8946 (phone) 925-866-8937 (fax) Sales@twinind.com