|
M7616 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – DC PIR CONTROLLER | |||
|
ä¸è¯åå°é«è¡ä»½æéå
¬å¸
MOSDESIGN SEMICONDUCTOR CORP.
DC PIR CONTROLLER
PIR CONTROLLER
M7616
GENERAL DESCRIPTION
The M7616 is a low power PIR ( passive infra-red ) controller LSI designed for battery powered can be used in many
application. The chip contains operation amplifiers, comparators, timer ,a voltage regulator, 2 oscillator and control circuits.
An CDS device is installed externally to cut off the operation of M7616 during the day time.
FEATURES
⧠High noise immunity.
⧠Low stand-by current < 50μA @3.0V
⧠RELAY Driver only.
⧠Adjustable play on duration and latch duration.
⧠CDS input conditionally.
⧠16 pin DIP or SOP package.
APPLICATIONS
⧠PIR light controller, Motion Detector, Alarm system, Auto-door bell.
PIN DESCRIPTION
PIN Pin Name I/O
Description
1 RETG
Trigger type selection
I VDDï¼Retriggerï¼VSSï¼Non-Retrigger
2 Relay
3,4 RR1/ RC1
5,6 RC2/ RR2
7 VSS
O Relay driver output through external NPN transistor. Active high.
â
Delay timing oscillator connect to external RC to adjust output active
duration when trigged. output active duration Tx â110000xR10xC6ã
â
Trigger latch timing oscillator connect to external RC to adjust latch
active duration when trigged. latch active duration Ti â110xR9xC7ã
â Negative power supply
8 RESET
I Normally connect to VDD, connect to VSS to reset Timer .
9 CDS
I
Connect to the CDS voltage divider for daytime/night auto detecting,.
When Vcds<VR daytimeï¼When Vcds >VR night (VRâ0.2VDD)
11 VDD
12 2OUT
13 2IN-
â Positive power supply
O 2nd Stage Operation amplifier output
I 2nd Stage Operation amplifier negative input
14 1IN+
I First Stage Operation amplifier positive input
15 1IN-
I First Stage Operation amplifier negative input
16 1OUT
O First Stage Operation amplifier output
M7616P
RETG 1
16 1OUT
RELAY
RR1
1IN-
1IN+
RC1
2IN-
RC2
RR2
VSS
2OUT
VDD
RESET 8
9 CDS
1/4
2007-03-12
|
▷ |