English
Language : 

M5D0112S-A Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 1 DIAMETER 2.0 AMPS 28 VDC
M5 - SERIES SPECIFICATIONS AND ORDERING INFORMATION
1" DIAMETER 2.0 AMPS @ 28 VDC
The M5 Series was orginally designed to meet the requirements of
MIL-S-3786/4. Standard construction includes 30° indexing up to 12
positions, solder lug terminals and adjustable stops. A very reliable
switch for long life.
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
2.0 amps @ 28 VDC; 2.5 amp @ 120 VAC.
Current Carrying Capacity: 12 amps.
Dielectric Strength: 1,500 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 5 milliohms.
Insulation Resistance: In excess of 100,000 megohms
Hardware: Mounting nut and lockwasher are shipped assembled.
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Terminals: Copper alloy with silver plating as standard.
Insulation: Diallyl phthalate.
Index: Dual-ball, hill and valley design.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 30° standard, 36°, 45°, 60°, and 90° available.
Index Stops: Fixed standard, adjustable, or continuous.
Stop Strength: 15 in. lbs. minimum.
STANDARD PART NUMBER
ADJUSTABLE STOPS
SWITCHES - 30° INDEXING - STOPS SET @ 2 POS. - SOLDER LUG TERMINALS
ACTIVE POLES/
POLES POSITIONS DECK
01
02-12
1
02
02-12
1
02
02-06
2
03
02-12
1
04
02-12
1
04
02-06
2
06
02-06
2
08
02-06
2
NO. OF
DECKS
1
2
1
3
4
2
3
4
SHORTING
M5D0112S - A
M5D0212S - A
M5D0206S - A
M5D0312S - A
M5D0412S - A
M5D0406S - A
M5D0606S - A
M5D0806S - A
NON-
FIG.
* SHORTING
M5D0112N - A CE
M5D0212N - A CE
M5D0206N - A CJ
M5D0312N - A CE
M5D0412N - A CE
M5D0406N - A CJ
M5D0606N - A CJ
M5D0806N - A CJ
DIMENSIONS
* FIGURES ARE SHOWN ON PAGE 55.
STANDARD CONSTRUCTION
M5D - DIALLYL PHTHALATE CONSTRUCTION
M
2010 Yonkers Road
• ELECTRONIC PRODUCTS
Raleigh, NC 27604
48
UNIT OF ELECTRO SWITCH CORP.
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016