LXC26-0350SW Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Constant Current LED Power Supplies

LED Power Supplies 26W
LXC26 series
LED Power Supply
Constant Current LED Power Supplies
LED POWER
next generation power
source
FEATURES
• High Efficiency (up to 86%)
• Constant Current Output
• Active PFC (Typical 0.92)
• IP66 Waterproof
• OVP, SCP, OLP, OTP
• -20 to 70°C deg operation
• Input 90-305VAC
• UL8750 compliant
• EN61347-1, -2-13 compliant
The LXC26 series of constant current LED power supplies from
Excelsys Technologies can deliver up to 26W of output power in an
extremely compact package size.
The LXC26 series of constant current power supplies provides up to 1750mA
of output current and 72V output voltage solutions for specific LED
requirements. With industry leading efficiencies, and an extensive protection
feature set, the LXC26 series provides high reliability and high performance
in a compact package
The LXC26 series carries the UL and CE mark for safety and is also RoHS
compliant.
Model Number
Output
Voltage
Output
Current
Input Voltage Efficiency
LXC26-0350SW⁽³⁾
LXC26-0450SW⁽³⁾
LXC26-0700SW⁽⁴⁾
LXC26-1050SW⁽⁴⁾
LXC26-1400SW⁽⁴⁾
LXC26-1750SW⁽⁴⁾
38-75V
29-58V
19-37V
13-25V
10-19V
8-15V
350mA
450mA
700mA
1050mA
1400mA
1750mA
90-305VAC
90-305VAC
90-305VAC
90-305VAC
90-305VAC
90-305VAC
86.0%
86.0%
85.0%
84.0%
83.0%
83.0%
Input Specifications
Parameter
Input Voltage Range
Input Frequency Range
Input Current
Inrush Current
Power Factor
Conditions/Description
Wide Input
100VAC in, 26W output
230VAC in, 25°C, Cold Start
220VAC, 110VAC
Min
90
47
0.92
Nom
Max
305
63
0.40
60
0.98
Units
VAC
Hz
A
A
Output Specifications
Parameter
Line Regulation
Load Regulation
Over Current Ripple
Overshoot/Output Current
Ripple and Noise
Turn-on Delay
Short Circuit Protection
Over Voltage Protection
Conditions/Description
20MHz Bandwidth. See Note 1
Measured at 220VAC and full load
Auto Recovery
Hiccup. Auto Recovery
Min
Nom
0
3.0
0.3
Max
±1
±3
50
10
5.0
0.5
Units
%
%
% load
% load
V
s
General Specifications
Parameter
Conditions/Description
Min
Nom
Max
Units
Isolation Voltage
Input to Output See Note 2
Input to Chassis
3000
1500
VAC
VAC
1
Efficiency
See individual models
84
%
Safety Agency Approvals UL8750,EN61347-1, -2-13, UL1310 Class 2 (Notes 3 & 4)
No load Power Dissipation Measured at 120VAC and 220VAC
5.0
W
MTBF
MIL HDBK 217F, 110VAC input, 80% load, 25°C
130,000
Hours
Lifetime
110VAC input, 80% load, 45°C
70,000
Hours
Weight
200
g
Operating Temperature
Derate 1.5%/°C from 50°C to 70°C
-20
+70
°C
Storage Temperature
-40
+85
°C
Relative Humidity
Non-condensing (operating)
10
100
%RH
Note 1.
Note 2.
Note 3.
Note 4.
Output connected in parallel with 0.1uF ceramic capacitor and 10uF electrolytic capacitor.
Primary to Secondary Isolation test not to be carried out on power supply.
Non UL1310 Class 2 outputs for US and Canada
UL1310 Class 2 outputs for US and Canada
Specifications are subject to change without notice
Europe/Asia
Excelsys Technologies Ltd
27 Eastgate Drive
Eastgate Business Park
Little Island, Cork, Ireland
IRELAND
t: [phone]
f: [phone]
e: [e-mail]
North America
Excelsys Technologies
519 Interstate 30, #309
Rockwall, TX 75087
USA
t: [phone]
f: [phone]
e: [e-mail]
LXC26 Preliminary Datasheet 16 Mar 2012