LICAL-ENC-HS0011 Datasheet, PDF (1/9 Pages) List of Unclassifed Manufacturers – HS SERIES ENCODER DATA GUIDE

HIGH SECURITY
HS SERIES
WIRELESS MADE SIMPLE ^®
ENCODER
HS SERIES ENCODER DATA GUIDE
®
DESCRIPTION
HS Series encoders and decoders are
designed for maximum security remote
control applications. The HS encoder
encodes the status of up to eight buttons or
contacts into a highly secure encrypted
output intended for wireless transmission
via a RF or infrared link. The HS Series
uses CipherLinx™ technology, which is
based on the Skipjack algorithm developed
by the U.S. National Security Agency
(NSA) and has been independently
evaluated by ISE. CipherLinx™ never
sends or accepts the same data twice,
never loses sync, and changes codes on
every packet, not just every button press.
In addition to state-of-the-art security, the
tiny 20-pin SSOP packaged parts also
offer innovative features, including up to 8
data lines, multiple baud rates, individual
“button level” permissions, keypad user
PIN, encoder identity output, low power
consumption, and easy setup.
CipherLinx
Technology
0.026
(0.65)
EVALUATED
0.309
(7.85)
0.207 (5.25)
0.013
(0.32)
0.007
(0.18)
Figure 1: Package Dimensions
RoHS
COMPLIAN _T
0.284
(7.20)
0.030
(0.75)
FEATURES
APPLICATIONS INCLUDE
„ CipherLinx™ security technology „ Keyless Entry / Access Control
„ ISE evaluated
„ Door and Gate Openers
„ Never sends the same packet twice „ Security Systems
„ Never loses sync
„ Remote Device Control
„ PIN-protected encoder access
„ Car Alarms / Starters
„ 8 selectable data lines
„ Home / Industrial Automation
„ “Button level” permissions
„ Remote Status Monitoring
„ Encoder ID available at decoder
„ Wide 2.0 to 5.5V operating voltage _{ORDERING INFORMATION}
„ Low supply current (370µA @ 3V) _{PART #}
„ Ultra-low 0.1µA sleep current
LICAL-ENC-HS001
DESCRIPTION
HS Encoder
„ Selectable baud rates
LICAL-DEC-HS001 HS Decoder
„ No programmer required
MDEV-LICAL-HS
HS Master Development System
„ Small SMD package
HS encoders are shipped on reels of 1,600
Patents Pending
Revised 1/28/08